Cisco Systems IAD2430 Series specifications Chassis Grounding, Port Numbering Conventions

Page 10

Chapter 1 Overview of Cisco IAD2430 Series IADs

Physical Description and LEDs

Table 1-3 Cisco 2430 Series IAD LEDs (Cisco 2432-24FXS shown)

No

LED/Color

Description

 

 

 

3

Link—green

Indicates link activity

 

100—green

100BASE-T active

 

FDX—green

Green when full duplex active, off when in half-duplex mode

 

 

 

4

ACT—green

Blinking green during packet transfer and interrupts

 

SYS—green

Blinking green for power on and self-test, solid green thereafter

 

PWR—green

Solid green when system has power

 

 

 

Product Serial Number Location for Cisco IAD2430 Series IADs

The serial number label for the Cisco IAD2430 Series IADs is located on the rear of the chassis, in the middle-left side. (See Figure 1-14.)

Figure 1-14 Serial Number Locations

A A A N N N N X X X X

IAD2431-8FXS

A A A N N N N X X X X

103054

Note The serial number for Cisco IAD2430 Series IADs is 11 characters long

Chassis Grounding

Chassis grounding is provided through the power cable, which uses a standard grounding plug. The chassis is also equipped with two multi 4 x 0.7 screw terminals for chassis grounding. The accessory kit contains a crimp-type ground lug that attaches to the two screw terminals. For more information, refer to the “Installing the Ground Connection” section on page 3-11.

Port Numbering Conventions

Port numbering conventions for Cisco IAD2430 series IAD are as follows:

•An external compact flash card is numbered CF 0.

•10/100BASE-T ports are numbered 10/100BASE-T 0/0 and 10/100BASE-T 0/1 from right to left.

•T1/E1 ports are numbered T1 or E1 1/0 and T1 or E1 1/1 from right to left.

Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide

1-10

OL-4234-05

 

 

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Overview of Cisco IAD2430 Series IADs OverviewCisco IAD2430-24FXS Cisco IAD2430 Series IADs Front PanelCisco IAD2431-8FXS Cisco IAD2431-16FXSCisco IAD2431-1T1E1 Cisco IAD2432-24FXSConfiguration Options WIC/VICCisco IAD2430 Series Deployment IADInterfaces and Service Capabilities 10 WAN Interface with Analog FXS and FXO User InterfacesWAN Physical Description and LEDs LED/Color DescriptionChassis Grounding Port Numbering ConventionsSpecifications Characteristic ValueConfiguration Methods Configuration ConnectionsSoftware Elements

IAD2430 Series specifications

Cisco Systems IAD2430 Series is a robust family of Integrated Access Devices (IAD) designed to meet the demands of converged voice, video, and data services for various types of enterprises. These devices provide a seamless and reliable solution for service providers and businesses that require high-quality communications and connectivity solutions.

One of the primary features of the IAD2430 Series is its ability to support both analog and digital voice services. This dual-functionality allows enterprises to migrate from legacy systems to Voice over IP (VoIP) without significant interruptions to their current operations. With support for multiple voice codecs, the IAD2430 ensures optimal call quality and bandwidth utilization during peak usage times.

Another significant characteristic of the IAD2430 Series is its built-in digital subscriber line (DSL) and Ethernet interfaces. This offers organizations flexibility in deploying a variety of broadband technologies, making it easier to integrate into existing infrastructure. The IAD2430 supports ADSL, ADSL2+, and VDSL2, thereby accommodating diverse networking requirements and allowing for higher data transmission rates.

The Cisco IAD2430 is also equipped with advanced security features, including firewalls and Virtual Private Network (VPN) support, ensuring that enterprise communications remain secure and private. This is especially important in today's digital landscape, where data breaches and cyberattacks are increasingly common.

In addition to robust security, the IAD2430 Series also provides comprehensive Quality of Service (QoS) capabilities. This ensures that voice and video traffic are prioritized over other types of data, thereby maintaining a high level of performance even during periods of heavy network congestion.

Furthermore, the IAD2430 models are designed with scalability in mind. Businesses can easily expand their voice and data services as their needs grow, making it a future-proof investment. The IAD2430 Series integrates seamlessly with Cisco's broad networking portfolio, allowing for easy management and configuration through Cisco's management tools.

Overall, the Cisco Systems IAD2430 Series stands out as a versatile and powerful solution for enterprises seeking to integrate various communication services. Its combination of voice support, broadband flexibility, security features, and QoS capabilities makes it an ideal choice for businesses looking to enhance their connectivity and operational efficiency in an increasingly connected world.
Top Page Image Contents