Cisco Systems 6400 appendix Abrfc, CBR.1 UBR.1, UBR.2 VBR.1 VBR.2 VBR.3 Other

Page 50

Appendix A Attribute Reference

Cross Connection Profile

Table A-25 Cross Connection Profile (continued)

Attributes

Acceptable Values

Default Values

 

 

 

Sustainable Cell Rate (cells/s) [raaz_scr]

 

 

SCR is the maximum average cell transmission rate that is allowed over

 

 

a given period of time on a given circuit. It allows the network to

 

 

allocate sufficient resources for guaranteeing the network performance

 

 

objectives are met.

 

 

W

 

 

 

 

 

Peak Cell Rate (cells/s) [raaz_pcr]

Numb (10)

0

PCR is the maximum allowed cell transmission rate. It defines the

Range=0-214748364

 

7

 

shortest time period between cells and provides the highest guarantee

 

that network performance objectives (based on cell loss ratio) will be

 

 

met.

 

 

W

 

 

 

 

 

Minimum Cell Rate (cells/s) [raaz_mcr]

Numb (10)

0

MCR is the minimum cell rate, which is the minimum allocated

Range=0-214748364

 

7

 

bandwidth for a connection.

 

 

 

W

 

 

 

 

 

Maximum Burst Size (cells) [raaz_mbs]

Numb (10)

0

MBS is the maximum number of cells that can be received at the PCR.

Range=0-214748364

 

This allows a burst of cells to arrive at a rate higher than the SCR. If

7

 

 

 

the burst is larger than anticipated, the additional cells are either tagged

 

 

or dropped. This parameter applies only to VBR traffic.

 

 

W

 

 

 

 

 

CDVT (microseconds) [raaz_cdvt]

Numb (10)

0

Cell Delay Variation Tolerance establishes the time scale over which

Range=0-214748364

 

7

 

the PCR is policed. This is set to allow for jitter (CDV).

 

 

 

W

 

 

 

 

 

Traffic Desc [raaz_tdtype]

Enum (7) "None"

 

This is the traffic descriptor type which describes the specified traffic

"ABR_FC"

 

parameters for the service (for more information consult the ATM

"ABR_NFC"

 

"CBR.1" "UBR.1"

 

Service Application Solutions Guide).

 

"UBR.2" "VBR.1"

 

M W

 

"VBR.2" "VBR.3"

 

 

 

 

"Other"

 

 

 

 

Z to A Direction

 

 

 

 

 

Bandwidth (kbits/s) [srza_bandwidth]

Numb (10)

 

This is the bandwidth consumed by the Z endpoint for the ZA

Range=0-214748364

 

7

 

direction.

 

 

 

 

 

 

Primary logical port [srz_primtp]

Text (44)

 

The original logical port that is being backed up by UNI resiliency

 

 

(nodename/portname).

 

 

 

 

 

Cisco 6400 Equipment Module Configuration Guide

 

A-50

OL-1812-01

 

 

 

Image 50
Contents Attribute Reference RDP Table ConventionsNetwork Text C4nt CPC class name for the network object Text This is the customer name. This attribute is optionalText This is the domain name. This attribute is optional Text This is the customer name Radius ServerObject Name C4rdRadius OAF C4rdRadius.oaf Text This is the domain nameText Specify a valid user name for the backup Radius server Text Specify a valid user name for the Radius serverText This attribute is not supported in this release Text This is the name of the containing network NodeObject Name C4ndNode OAF C4ndNode.oaf Text C6400UAC Node typeText Indicates the type of the last upload from this node NSP Specific InformationPhysical Port PublicOC12, CPU, NRP Text Use this field to add user information Numb Resource model specific map Range=0-214748364Text This attribute is not used Text Network containing the physical portBool Logical PortText IP address of the NRP/NRP2 associated with this port FalseATM DCEDddddddddd Bandwidth Incoming Maximum kbits/s srazbandwidth Cross Connection Text This is the domain. This attribute is optional Text Specify a name for the cross-connectionText This is the customer. This attribute is optional NSPATM LPort Associations Endpoint LPort sratp.srname ABR UBR Abrfc Abrnfc UBR.1 UBR.2 VBR.1 VBR.2 VBR.3 OtherEnum This is the cast type P2mp-leaf P2mp-root, p2p None NRP Internal PVC NRP2 Text IP address of the remote end of the PVC sub interface Numb Minimum cell rate Range=0-214748364Enum This is the dial type for the tunnel Dialouts, other Singlehop TunnelObject Name C4mtTunnel OAF C4mtTunnel.oaf Enum 4 l2tp, 12f Specify the tunnel typeMultihop Tunnel Text Logical port that contains the tunnel Text Remote tunnel password Mhit onlyEnum 5 l2tp, 12f Specify the tunnel type Pppoe Text Node that contains the tunnelAggregation Key Object Name C4akAggrKey OAF C4akAggrKey.oafSinglehop Tunnel Destination Numb Priority for the tunnel destination Range=1-32767 Multihop Tunnel DestinationText Destination IP address Text Pointer to the SHTunnel objectService List UBR ABR VC Class Object Name C4clVCClass OAF C4clVCClass.oafVC-Class Parameters VC-Class Name vcclassname Encapsulation encapsulation Text This is the node that contains the VC class Virtual TemplateText This is the logical port that contains this VC class Object Name C4vtVT OAF C4vtVT.oafAal5autoppp Pppoe Aal5snap Multi-hop Other Access Control List Access Control Element Route Entry Attributes Acceptable ValuesAuthenticator Acceptable Values Default ValuesPhysical Port Profile OC12, CPU, NRP Text This is the logical port profile name Logical Port ProfileObject Name C4lpLportProfile OAF C4lpLportProfile.oa Numb Resource model specific map Range=0-214774836 Numb Logical port usage priority Range=0-214748364Dddddddddd Bool Specify whether to enable or disable routing Text This is the cross connection profile name Cross Connection ProfileObject Name C4vcPvcxProf OAF C4vcPvcxProf.oaf Text This is the Provider Service Nodename/portnameUBR.2 VBR.1 VBR.2 VBR.3 Other AbrfcCBR.1 UBR.1 Sustainable Cell Rate cells/s razascr Object Name C4cxPvcxProf OAF C4cxPvcxProf.oaf NRP Internal PVC ProfileEnum 9 p2mp-leaf This is the cast type P2mp-root, p2p None Sub-interface Type c4subiftype Virtual Template Attributes Authentication c4authenticate
Related manuals
Manual 34 pages 50.12 Kb