Cisco Systems 3522 BRI manual Procedure

Page 26

Chapter 2 Setting Up Your Cisco Unified Videoconferencing 3500 Gateway

How to Perform the Cisco Unified Videoconferencing 3500 Gateway Unit Initial Configuration

Procedure

Step 1 Connect the supplied terminal cable to the PC terminal.

Step 2 Connect the power cable.

Step 3 Start the terminal emulation application on the PC.

Step 4 Set the communication settings in the terminal emulation application on the PC as follows:

Baud rate: 9600

Data bits: 8

Parity: None

Stop bits: 1

Flow control: None

Step 5 Turn on the power to the Cisco Unified Videoconferencing 3500 Gateway unit.

Step 6 After the terminal emulator session starts, press the RST button on the Cisco Unified Videoconferencing 3500 Gateway unit front panel to reset the module.

A log of the auto-boot events and a VxWorks banner scrolls across the computer monitor.

Note When the Cisco Unified Videoconferencing 3500 Gateway unit is started for the first time, two VxWorks banners appear. The configuration option appears after the second banner.

Step 7 When the message “Press any key to start configuration” appears on the screen, press any key within 6 seconds.

The network configuration Main menu appears:

Press any Key To start configuration...

Main menu

Enter <N> to configure default network port values

Enter <P> to change the configuration software password

Enter <A> to display advanced configuration menu

Enter <Q> to quit configuration menu and start GW

Caution If you do not press a key before the countdown ends, the device continues its initialization and you can only configure the device by pressing the RST button on the front panel.

Step 8 At the prompt, type N to configure default network port values and press Enter.

Step 9 At the Enter IP address for default interface prompt, type the IP address you want to assign to the Cisco Unified Videoconferencing 3500 Gateway unit and press Enter.

Caution Do not use leading zeros in the IP address.

Step 10 At the Enter Default Router IP Address prompt, type the IP address of the router associated with the segment in which the unit will be installed and press Enter.

 

 

 

Caution

Do not use leading zeros in the IP address.

 

 

 

 

 

 

 

 

Step 11 At the Enter IP Mask <HEX> for default device prompt, type the subnet mask as follows:

 

 

 

Installation and Upgrade Guide for Cisco Unified Videoconferencing 3522 BRI Gateway and 3527 PRI Gateway Release 5.6

 

 

 

 

 

 

 

 

 

 

2-8

 

 

OL-17010-01

 

 

 

 

 

Image 26
Contents Americas Headquarters Customer Order Number Text Part Number OL-17010-01Page N T E N T S Safety EMC OL-17010-01 Functionality About Cisco Unified Videoconferencing 3500 Gateway ProductsTCS4 About Gateway FeaturesFeature Description Feature Description Feature Cisco Unified VGA, XGA, SVGA, SIF, 4SIF, CIF, QCIF, 4CIF, 16CIFFeature Cisco Unified About Multimedia Conferencing Multimedia Conferencing through the GatewayAbout Point-to-Point Conferencing About Multipoint ConferencingAbout Gateway IP Network Connections About Gateway Isdn Network ConnectionsPRI Gateways BRI Gateways Capacity About PRI Gateway Call Handling CapacityAbout BRI Gateway Call handling Capacity About Peer-to-Peer Connectivity About Gateway Call Bandwidth OverheadResource Allocation across E1/T1 Lines Setting Up Your Cisco Unified Videoconferencing 3500 Gateway Physical DescriptionComponent Description Front PanelCisco Unified Videoconferencing 3527 PRI Gateway Rear Panel Cisco Unified Videoconferencing 3522 BRI Gateway RTM Cisco Unified Videoconferencing 3522 BRI Gateway Rear PanelProcedure EktsVerifying the Package Contents How to Perform the Cisco Unified About the Initial Configuration and Boot PhasesBefore You Begin Connecting to a PCSetting the IP Address RequirementsProcedure Setting Ethernet Speed and Duplex Parameters Press EnterChanging the Configuration Tool Login Password Snmp Management Local Port Monitoring ConnectionsPerforming Software Upgrades For example, http//125.221.23.44 or boardnameOnline Help Registration Netscape Navigator UsersOL-17010-01 Launching the Cisco Software Upgrade Utility Using the Cisco Software Upgrade UtilityAbout the Cisco Software Upgrade Utility Upgrading Software Click CustomizeRJ-45 8-Pin IP Network Port Cable Connections and Pin-outsRS-232 9-Pin Serial Port Pin FunctionRXD + Isdn PortRXD+ TXD +Push Buttons Technical SpecificationsLED Indicators Communication InterfacesOperating System Power SupplyChipset MemoryGrounding SafetyElectrical Safety Batteries ESD ProceduresHigh Voltage Elektrische Sicherheit SicherheitSeguridad ESD-VerfahrenPuesta a Tierra Seguridad ElectricaProcedimientos ESD Alta TensiónSecurite Electrique Mise a la TerrePrevention des Decharges Electrostatiques Haute TensionCISPR24 Safety ComplianceCompliance and Certifications Acta Part 68 Notice TelecomFCC Part 15 Notice CE CTR3, CE CTR4Environmental Compliance Industry CanadaOL-17010-01 BRI EMCLine quality Local Configuration Monitoring IsdnSnmp SvgaPRI IN-4
Related manuals
Manual 54 pages 21.8 Kb

3522 BRI specifications

Cisco Systems has long been a leader in networking and telecommunications equipment, and its BRI (Basic Rate Interface) and PRI (Primary Rate Interface) products are essential components in enabling businesses to manage voice and data communications efficiently. Notable models such as the Cisco 3522 BRI and 3527 PRI have earned recognition for their robust performance and versatile features.

The Cisco 3522 BRI is designed to deliver high-quality voice and data services over ISDN (Integrated Services Digital Network) connections. With two B channels for voice or data transmission, each supporting up to 64 Kbps, this device is ideal for small to medium-sized businesses that require reliable communication solutions while maintaining cost-effectiveness. The Cisco 3522 BRI supports multiple protocols, making it a flexible choice to adapt to various network environments.

On the other hand, the Cisco 3527 PRI supports up to 30 B channels, thereby significantly increasing the capacity for voice calls and data transfer. This scalability makes the 3527 PRI suitable for larger organizations that demand higher throughput and call handling capability. It operates over T1 and E1 lines, allowing businesses to leverage existing infrastructure while improving operational efficiencies. Additionally, the 3527's advanced features, such as call processing and load balancing, contribute to a seamless communication experience.

Both devices support a range of technologies that enhance functionality and performance. They are equipped with Call Admission Control (CAC) to optimize bandwidth use and reduce congestion during peak traffic. Cisco's VoIP technology, including features such as voice provisioning, fax over IP, and QoS (Quality of Service) mechanisms, ensures voice clarity and reliability.

Security is paramount, and both the 3522 and 3527 incorporate various protocols such as SRTP (Secure Real-Time Transport Protocol) to protect voice communications against unauthorized access. Furthermore, integration with Cisco's unified communications offerings allows for a more cohesive communication strategy, ensuring that users can take advantage of collaboration tools and data services.

In conclusion, the Cisco 3522 BRI and 3527 PRI models stand out with their impressive feature sets and technologies, making them an excellent investment for businesses needing reliable, scalable, and secure voice and data communication solutions. Choosing Cisco means embracing a future-proof solution that can grow with your organization's communication needs.