Fujitsu Siemens Computers N3510 manual Information Menu Viewing Current System Parameters

I n f o r m a t i o n M e n u

INFORMATION MENU – VIEWING CURRENT SYSTEM PARAMETERS

The Information Menu allows you to view the current system parameters. This is the default screen, and cannot be changed directly.

The following tables show the names of the menu fields for the Information menu. This screen reflects the current system settings.

	Insyde Software SCU								Jan 26, 2005		5:05 PM
Main			Advance	Security		Boot Exit
		System						CPU
		Primary Master:			HTS424040M9AT00			Intel(R) Pentium(R)			M 740
		Secondary Master: MATSHITADVD-RAM UJ-831S						Speed:		1.73 GHz
		BIOS Version:			x.xx			L1 Cache:			64 KB
								L2 Cache:			2048 KB
		BIOS Date:			xx/xx/xx
		BIOS Area:			E000h - FFFFh
		Supervisor Password Is:					Clear	Memory
		User Password Is:					Clear
		Primary Master Password Is:					Clear	Total:		256 MB
								Slot 1:		256 MB DDR2
		Owner Information Is :					Clear	Slot 2:		0 MB DDR2
		Asset Number :			None

Configures startup conditions (fast boot, password. etc)

Figure 1. Information Menu

Table 1: Fields, Options and Defaults for the Information Menu

Note that the parameters shown in the figure may vary depending upon your system’s configuration.

Block Name			Field Name			Description
System	■	Primary Master:		■	Supervisor Password Is:	The System block contains information about the sys-
	■	Secondary Master:		■	User Password Is:	tem setup, including current password statuses,
	■	BIOS Version:		■	Primary Master Password Is:	installed drives, BIOS version and location, and owner
	■	BIOS Date:		■	Owner Information Is:	information. For information on changing this informa-
	■	BIOS Area:		■	Asset Number:	tion, see the appropriate section of this manual.
CPU	■	Processor Name		■	L1 Cache:	The CPU block provides information about the type and
	■	Speed:		■	L2 Cache:	speed of the processor, and the size of the cache(s).
Memory	Total:					The Memory block displays the size and location of the
	Slot 1:					currently installed memory.
	Slot 2:

3