Fujitsu Siemens Computers B3000 manual Exiting from Main Menu, Heads Number between

Page 7

M a i n M e n u

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field	Options		Default	Description

Heads:	n	A number between	–—	This item is active only when Hard Disk is selected as type. You can
		1 and 16		change the value by incrementing (pressing the [Spacebar]), by typing
				in the number, or using the “+” and “-” keys.

Sectors:	n	A number between	–—	This item is active only when Hard Disk is selected as type. You can
		0 and 63		change the value by incrementing (pressing the [Spacebar]), by typing
				in the number, or using the “+” and “-” keys.

Maximum	n	Display only	–—	Displays the maximum capacity of the drive calculated from the
Capacity:				parameters of the hard disk when Auto is selected and the type is iden-
				tified as hard disk.

Multi-Sector	n	Disabled	[16 Sectors]	This option cannot be changed when Auto is selected. Specify the
Transfers:	n	2 Sectors		number of sectors per block for multiple sector transfer.
	n	4 Sectors
	n	8 Sectors
	n	16 Sectors

LBA Mode	n	Disabled	[Enabled]	Enables or disables logical Block Addressing in place of Cylinder, Head,
Control:	n	Enabled		Sector addressing. This option cannot be changed when Auto is
				selected.

Transfer Mode:	n	Standard	[Multiword	Selects the method for moving data to/from the drive. Autotype the
	n	Fast PIO 1	DMA 2]	drive to select the optimum transfer mode. This option cannot be
	n	Fast PIO 2		changed when Auto is selected.
	n	Fast PIO 3
	n	Fast PIO 4
	n	Multiword DMA 1
	n	Multiword DMA 2

Ultra DMA	n	Disabled	[Disabled]	Selects the method for moving data to/from the drive. Autotype the
Mode:	n	Mode 0		drive to select the optimum transfer mode. This option cannot be
	n	Mode 1		changed when Auto is selected.
	n	Mode 2
	n	Mode 3
	n	Mode 4
	n	Mode 5

Exiting from Main Menu

When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to another menu. If you wish to exit from the setup utility, press the [Esc] key , use the cursor keys to go to the Exit menu, or press [F10] to exit and save. If you wish to move to another menu, use the cursor keys.

7

Image 7

Contents Fujitsu LifeBook Series Entering the Bios Setup Utility Bios Setup UtilityNavigating Through The Setup Utility E r i e s B I O S Fields, Options and Defaults for the Main Menu Main Menu Setting Standard System ParametersSystem Date Exit Primary Master Submenu of the Main MenuHeads Number between Exiting from Main MenuMenu Field Description Advanced Menu Setting Device Feature ControlsFields, Options and Defaults for the Advanced Menu Main Advanced Security Boot Info ExitUSB All I/O addresses in are in hexadecimal EnabledECP Menu Options Default Description FieldAlways Enabled/Always Disabled The internal pointing Keyboard/Mouse Features Submenu of the Advanced MenuAuto Video Features Submenu of the Advanced MenuInternal Device Configurations Submenu Internal Device Configurations Submenu of the Advanced MenuCPU Features Submenu CPU Features Submenu of the Advanced MenuUSB Features Submenu USB Features Submenu of the Advanced MenuDisabled Miscellaneous Features Submenu of the Advanced MenuEvent Logging Submenu Event Logging Submenu of the Advanced MenuBoot Info Exit Security Menu Setting the Security FeaturesExiting from the Security Menu PasswordHard Disk Security Submenu of the Security Menu Main Advanced Security Power Savings ExitOwner Information Submenu of the Security Menu Owner Information submenu is for setting owner informationFields, Options and Defaults for the Boot Menu Boot Menu Selecting the Operating System SourceExiting from Boot Menu Boot Device Priority Submenu of the Boot MenuMenu Field Default Fields, Options and Defaults for the Info MenuInfo Menu Displays Basic System Information Fields, Options and Defaults for the Exit Menu Exit Menu Leaving the Setup UtilityMenu Field Optional Description Bios memory. The message Save configuration changes now?