Cisco Systems IC-23 manual PA-VG100 Port Adapter Configuration Example, IC-62

Page 40

Configuring LAN Interfaces

LAN Interface Configuration Examples

Router(config)# interface ethernet 3/2 Router(config-if)#bridge-group 20 Router(config-if)#cut-through Router(config-if)#no shutdown Router(config-if)#exit Router(config)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet3/2, changed state to up

%LINK-3-UPDOWN: Interface Ethernet3/2, changed state to up

Router(config)# interface ethernet 3/3 Router(config-if)#bridge-group 20 Router(config-if)#cut-through Router(config-if)#no shutdown Router(config-if)#exit Router(config)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet3/3, changed state to up

%LINK-3-UPDOWN: Interface Ethernet3/3, changed state to up

The following example shows integrated routing and bridging enabled on the bridge groups. Bridge group 10 is assigned an IP address and subnet mask and the shutdown state is changed to up. Bridge group 10 is configured to route IP.

Router(config)# bridge irb Router(config)# interface bvi 10 Router(config-if)# ip address 1.1.15.1 255.255.255.0 Router(config-if)# no shutdown Router(config-if)# exit

Router(config)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface BVI10, changed state to up

Router(config)# bridge 10 route ip

Router(config)# exit

Router#

PA-VG100 Port Adapter Configuration Example

The following is an example of a basic configuration for the PA-VG100 port adapter interface in slot 1 on a Cisco 7500 series router. In this example, IP routing is enabled on the router, so an IP address and subnet mask are assigned to the interface.

configure terminal interface vg-anylan 1/0/0

ip address 1.1.1.10 255.255.255.0 no shutdown

exit exit

Cisco IOS Interface Configuration Guide

IC-62

Image 40
Contents Configuring an Ethernet or Fast Ethernet Interface IC-23Ethernet and Fast Ethernet Interface Configuration Task List IC-24Specifying an Ethernet Encapsulation Method Specifying an Ethernet or Fast Ethernet InterfaceIC-25 Specifying Full-Duplex Operation Specifying the Media and Connector TypeIC-26 Extending the 10BASE-T Capability Configuring Fast Ethernet 100BASE-TIC-27 Configuring PA-12E/2FE Port Adapter IC-28Configuring the PA-12E/2FE Port Adapter IC-29IC-30 Monitoring and Maintaining the PA-12E/2FE Port Adapter IC-31IC-32 Configuring the 100VG-AnyLAN Port Adapter Configuring Fast EtherChannelIC-33 Fast EtherChannel Configuration Task List IC-34Configuring the Port-Channel Interface IC-35Configuring the Fast Ethernet Interfaces IC-36Configuring a Fiber Distributed Data Interface IC-37Using Connection Management Information IC-38Specifying a Fddi Fddi Configuration Task ListIC-39 Enabling Fddi Bridging Encapsulation Enabling Full-Duplex Mode on the FddiIC-40 Setting the Token Rotation Time Setting the Transmission Valid TimerControlling the Transmission Timer Modifying the C-Min TimerModifying the TB-Min Timer Modifying the Fddi Timeout TimerSetting the Bit Control Controlling SMT Frame ProcessingSetting Fddi Frames Per Token Limit Controlling the CMT MicrocodeStarting and Stopping Fddi IC-43Configuring a Hub Interface Controlling the Fddi SMT Message Queue SizePreallocating Buffers for Bursty Fddi Traffic IC-44Enabling a Hub Port Disabling or Enabling Automatic Receiver Polarity ReversalDisabling or Enabling the Link Test Function IC-45Enabling Snmp Illegal Address Trap Enabling Source Address ControlIC-46 Configuring a LAN Extender Interface Connecting a LAN Extender to a Core RouterExpanded View of the Connection to a Core Router IC-47Installing a LAN Extender at a Remote Site Discovering the MAC AddressUpgrading Software for the LAN Extender Management of the LAN Extender InterfaceConfiguring the LAN Extender IC-49Configuring and Creating a LAN Extender Interface LAN Extender Interface Configuration Task ListIC-50 Defining Packet Filters IC-51Filtering by MAC Address and Vendor Code IC-52Controlling Priority Queueing IC-53Controlling the Sending of Commands to the LAN Extender IC-54Downloading a Software Image to the LAN Extender Restarting the LAN ExtenderIC-55 Troubleshooting the LAN Extender IC-56System OK IC-57Configuring a Token Ring Interface IC-58Token Ring Interface Configuration Task List Dedicated Token Ring Port AdapterSpecifying a Token Ring Interface Enabling Early Token ReleaseLAN Interface Configuration Examples Configuring PCbus Token Ring Interface ManagementEnabling Token Ring Concentrator Port Monitoring and Maintaining the PortEthernet Encapsulation Enablement Example Full Duplex Enablement Operation ExamplePA-12E/2FE Port Configuration Examples IC-61PA-VG100 Port Adapter Configuration Example IC-62Fast EtherChannel Configuration Examples IC-63Fddi Frames Configuration Example IC-64Hub Configuration Examples Hub Port Startup ExamplesHub Port Shutdown Examples IC-65LAN Extender Enablement Interface Example LAN Extender Interface Access List ExamplesSnmp Illegal Address Trap Enablement for Hub Port Example MAC Address Filtering ExampleEthernet Type Code Filtering Example IC-67IC-68

IC-23 specifications

Cisco Systems IC-23 is a robust networking device designed to address the ever-evolving demands of modern enterprises. As part of Cisco's extensive portfolio, the IC-23 serves as an ideal solution for organizations seeking to enhance their network performance, reliability, and scalability.

One of the standout features of the Cisco IC-23 is its high-speed connectivity options. With support for both wired and wireless communications, this device can seamlessly integrate into a wide range of network architectures. It offers multiple Gigabit Ethernet ports, enabling rapid data transfer and facilitating the connection of numerous devices without compromising performance.

Another key characteristic of the IC-23 is its advanced security protocols. Data breaches and cyber threats are persistent concerns in today's digital landscape, and Cisco addresses these challenges head-on with robust security measures. The IC-23 incorporates features such as firewall capabilities, intrusion detection systems, and secure VPN support, ensuring that sensitive information remains protected while traversing the network.

The IC-23 also leverages Cisco's renowned software-defined networking (SDN) capabilities. This technology allows businesses to manage their network resources dynamically, ensuring optimal performance based on real-time demands. As a result, organizations can easily adjust their network configurations to meet fluctuating workloads, enhancing both efficiency and cost-effectiveness.

Scalability is another critical feature of the IC-23, making it an excellent choice for growing companies. Cisco has designed this device to accommodate increasing data traffic without necessitating a complete overhaul of existing infrastructure. This adaptability ensures that organizations can expand their networks smoothly as their operations evolve.

Moreover, the IC-23 supports a variety of network management tools, providing IT teams with the insights needed to monitor performance and troubleshoot issues proactively. Cisco's user-friendly interface simplifies the process of network management, allowing administrators to optimize resources and maintain continuous uptime.

In conclusion, Cisco Systems IC-23 stands out as a highly capable networking solution tailored for modern enterprises. With its high-speed connectivity, comprehensive security features, SDN capabilities, scalability, and intuitive management tools, the IC-23 is well-equipped to meet the demands of today’s digital environments. As organizations continue to navigate the complexities of the digital age, the IC-23 prepares them to thrive in an increasingly interconnected world.