Cisco Systems CiscoWorks2000 manual TCP Ports Used by ACL Manager

Chapter 1 Installing ACL Manager

System Requirements for ACL Manager

To modify the gatekeeper configuration file:

Step 1 Stop the Daemon Manager by entering:

On Windows,

net stop crmdmgtd

On Solaris,

/etc/init.d/dmgtd stop

Step 2 Replace every instance of external-IP-addresswith the external IP address that you choose, and remove the character “#”, from the following:

#vbroker.gatekeeper.backcompat.callback.host=external-IP-address#vbroker.se.exterior.host=external-IP-address#vbroker.se.iiop_tp.host=external-IP-address#vbroker.se.interior.host=external-IP-address

Step 3 After modifying the gatekeeper configuration file, restart the Daemon Manager by entering:

On Windows,

net start crmdmgtd

On Solaris,

/etc/init.d/dmgtd start

TCP Ports Used by ACL Manager

ACL Manager uses the ports 1683 and 8088, in addition to the ports documented for CiscoWorks2000.

If 1683 is blocked by a firewall, ACL Manager uses the port 8088.

	Installation Guide for ACL Manager
1-4	78-14158-01