Cisco Systems 4430 specifications Network Cables

Chapter 1 Introducing the Content Router 4430

System Hardware Features

Figure 1-3 Identifying a Rollover Cable

Pin 1 and pin 8

should be the

same color

Pin 1 Pin 8

H3824

Network Cables

An Ethernet cable is required to connect the Content Router 4430 to your network. To connect the Content Router 4430 to your network, you must use one of the following types of cables:

•Unshielded twisted-pair (UTP) straight-through cable with RJ-45 connectors to connect the Content Router 4430 to a Medium Dependent Interface-crossover (MDI-X) port

•RJ-45 to RJ-45 crossover cable to connect the Content Router 4430 to another MDI port

Note The Ethernet ports on the Content Router 4430 are MDI.

Use a Category 5 UTP cable to connect to a 100BASE-T network.

	Cisco Content Router 4430 Hardware Installation Guide
78-12541-01		1-7