Cisco Systems 3620 manual 13302

Installing the Fan-Speed Controller

Figure 5	Attaching the Fan-Speed Controller Bracket to the Motherboard
	Fan-speed
	controller	Power supply
	bracket with	connectors
	card on top

Fan connectors

13302

Step 5 Position the fan-speed controller bracket so that the card is on the top side, and the holes in the bracket and motherboard are aligned. (See Figure 5.)

Step 6 Secure the bracket to the motherboard with the screws removed in Step 2. (See Figure 5.)

Note If you misplaced the previously removed screws, use the replacement screws included with the fan-speed controller kit.

Note Avoid stressing the fan and power supply cables when the bracket is secured.

10Installing a Fan-Speed Controller in Cisco 3620 Routers