Cisco Systems 805 Series quick start Connect the Power and Turn On the Router

Page 7

8Connect the Power and Turn On the Router

Follow these steps to connect power to the Cisco 805 router and turn it on:

Figure 4 Connecting the Power to a Cisco 805 Router

To electrical

outlet

	HUB
LINK	NO HUB

ETHERNET
	CONSOLE
10	BASE T

Cisco

805

SERIAL

			6-pin connector
	Desktop power supply

Step 1	Make sure the router power is off.
Step 2	Set the power switch to the STANDBY (		) position.

Step 3 Connect the power supply cable to the 6-pin connector on the router.

Step 4 Connect the power cord to the desktop power supply.

Step 5 Connect the other end of the power cord to an electrical outlet.

Step 6 Turn ON the router. Press the power switch to on ().

7

Image 7

Contents Cisco 805 Series Router Cabling and Setup Replacement, Repair, or Refund Policy for Hardware Cisco One-Year Limited Hardware Warranty TermsVerify the PC Setup Parts ListOverview Connect the Cisco 800 Series Router to a PC Connecting a Cisco 805 Router to a PCConnect the Cisco 805 Router to a Serial Drive Connect the Cisco 800 Series Router to a HubMode Signaling Gender Part Number Connecting the Power to a Cisco 805 Router Connect the Power and Turn On the RouterLED Verifying the LEDsDocumentation Feedback Obtaining DocumentationObtaining Technical Assistance Cisco Product Security OverviewObtaining Additional Publications and Information Submitting a Service RequestPage Page Page Page USA