Cisco Systems AIRCT576025K9, AIRCT5760HAK9 specifications YES unset up up

Page 23

Using the Startup Wizard

Step 3 Enter the enable secret password. This password is used to protect access to privileged EXEC and configuration modes. This password, after entered, becomes encrypted.

Step 4 Enter the enable password. This password is used when you do not specify an enable secret password (for some older software versions, and some boot images).

Step 5 Enter the virtual terminal password. This password is used to protect access to the controller over a network interface.

Step 6 If you want the controller to receive its time setting from an external Network Time Protocol (NTP) server when it powers up, enter yes to configure an NTP server. Otherwise, enter no.

•If you enter yes:

a.Enter the NTP server address.

b.Enter the polling interval (between 16 and 131072 secs, which is a power of 2).

•If you enter no:

a.Enter yes to configure the system time.

b.Enter the current date in MM/DD/YY format and the current time in HH:MM:SS format.

Step 7 To configure the wireless network, enter yes.

Step 8 If desired, enter the name of the mobility group to which you want the controller to belong. Step 9 Enter the code for the country in which the controller will be used.

Step 10 When prompted to configure the SNMP network management, enter yes or no.

•If you enter yes, enter the Community String.

•If you enter no, proceed to the next step.

Step 11 Perform management network configuration. The current interface summary appears. For an example:

Interface IP-Address OK? Method Status Protocol

Vlan1 unassigned YES NVRAM administratively down down

GigabitEthernet0/0

unassigned YES unset administratively down down

Te1/0/1 unassigned

YES unset up up

Te1/0/2 unassigned

YES unset down down

Te1/0/3 unassigned

YES unset down down

Te1/0/4 unassigned

YES unset down down

Te1/0/5 unassigned

YES unset down down

Te1/0/6 unassigned

YES unset down down

a.Enter the interface name used to connect to the management network from the above summary. In this example, the interface name is GigabitEthernet0/0.

b.To configure the IP address on the interface, enter yes.

c.Enter the IP address for the interface.

d.Enter the subnet mask for the interface.

Step 12 Configure the wireless management interface.

The wireless management interface must be configured at startup. It should be mapped to an SVI that is not Vlan1.

a.Enter the VLAN number for the wireless management interface.

b.Enter the IP address for the interface.

c.Enter the IP address mask for the interface.

Cisco 5700 Series Wireless Controller Installation Guide

 

OL-28544-01

23

 

 

 

Page 22 Page 24
Image 23
Page 22 Page 24
Contents FCC Safety Compliance Statement Compliance and Safety InformationStatement 372-Wireless LAN Products Safety InformationStatement 191-VCCI Class a Warning for Japan Controller OverviewUSB Type a Port Port ConnectionsUSB Mini-B Console Port Part Number Description 10G SFP+ PortsSFP-GE-L= SFP-GE-S=SFP-H10GB-CU5M= SFP-10G-LRM=SFP-H10GB-CU1M= SFP-H10GB-CU3M=10/100/1000 Ethernet Management Port Mode LED DescriptionController’s System LEDs RJ-45 Console PortUnpacking and Installing the Controller Required Tools and Information Box Contents104 F 40 C Statement Initial System Configuration InformationChoosing a Physical Location Cable Type Size micron MHz/km1 Cable Distance Core Modal Size/Cladding Bandwidth SFP Module10GBASE-LR SFP-GE-LSFP-GE-S 10GBASE-ERRack-Mounting Installing the ChassisRack-Mounting Brackets Attaching the Rack-Mount Brackets Attaching Brackets for 19-inch Racks Mounting the Controller in a Rack Table- or Shelf-MountingGrounding the Chassis Preventing ESD Damage Connecting the Controller’s Console PortUsing the Startup Wizard YES unset up up Logging into the Controller Verifying Interface Settings and Port OperationConnecting Access Points Power Supply InstallationConnecting the Console Port Optional PWR-C1-BLANK Power Supply Module OverviewAC Power Supply Module LEDs Installation GuidelinesInstalling or Replacing an AC Power Supply AC-Power Supply with Power Cord Retainer Finding the Power Supply Module Serial NumberInstallation Guidelines Installing a Fan ModuleFan Module Installation Finding the Fan Module Serial Number Installing the Fan ModuleEnvironmental Ranges SpecificationsPhysical Specifications PWR-C1-350WAC Cisco 90-Day Limited Hardware Warranty TermsPhysical Specification Operating SpecificationTo Receive a Return Materials Authorization RMA Number Duration of Hardware WarrantyReplacement, Repair, or Refund Policy for Hardware Related Documentation OL-28544-01

AIRCT576025K9, AIRCT5760HAK9 specifications

Cisco Systems has established itself as a leading provider in networking technology, with products designed to enhance connectivity and security in various environments. Among its diverse portfolio, the Cisco AIR-CT5760-HA-K9 and AIR-CT5760-25-K9 wireless controllers stand out for their advanced capabilities in managing wireless networks.

The Cisco AIR-CT5760 series provides robust features that cater to the needs of modern enterprises requiring scalable, high-performance solutions. These controllers are designed to support up to 6,000 access points and 64,000 client devices, making them an ideal choice for large organizations with extensive wireless networks.

One of the standout features of the AIR-CT5760 is its support for Cisco's advanced mobility services architecture. This technology enables seamless roaming and handoff between access points, ensuring that end users maintain uninterrupted connectivity while moving throughout the coverage area. Additionally, the controllers leverage Cisco CleanAir technology, which actively detects and mitigates Wi-Fi interference by identifying non-Wi-Fi devices that can disrupt communication, thereby optimizing wireless performance.

Security is a paramount consideration in today's digital landscape, and the AIR-CT5760 series addresses this concern with integrated security features. It supports Cisco Identity Services Engine (ISE), enabling context-aware access control and policy enforcement, ensuring that only authorized users and devices can connect to the network. The controllers also support advanced encryption protocols to secure data transmissions over wireless connections.

Another significant characteristic of the AIR-CT5760 series is its support for multi-vendor environments. Utilizing the OpenFlow protocol and the Cisco Wireless LAN Controller technology, these controllers can manage access points from various manufacturers, providing a flexible solution for diverse networking environments.

High availability is critical for mission-critical applications, and the AIR-CT5760-HA-K9 model offers redundancy features to ensure continuous operation. The controller can be configured in a high-availability pair, allowing for automatic failover in the event of hardware failure, thus minimizing downtime.

Moreover, the AIR-CT5760 series emphasizes ease of management through Cisco Prime Infrastructure, providing an intuitive interface for network administrators to deploy, monitor, and troubleshoot the wireless network, thereby enhancing operational efficiency.

In conclusion, the Cisco AIR-CT5760-HA-K9 and AIR-CT5760-25-K9 wireless controllers deliver sophisticated solutions tailored for the demands of enterprise wireless networking. With their scalability, advanced security measures, and support for a multi-vendor ecosystem, these controllers are pivotal in building reliable, high-performing wireless networks that drive business success.
Top Page Image Contents