Cisco Systems CISCO1750 manual

Page 2

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

The following information is for FCC compliance of Class A devices: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case users will be required to correct the interference at their own expense.

The following information is for FCC compliance of Class B devices: The equipment described in this manual generates and may radiate radio-frequency energy. If it is not installed in accordance with Cisco’s installation instructions, it may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in part 15 of the FCC rules. These specifications are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation.

Modifying the equipment without Cisco’s written authorization may result in the equipment no longer complying with FCC requirements for Class A or Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.

You can determine whether your equipment is causing interference by turning it off. If the interference stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment causes interference to radio or television reception, try to correct the interference by using one or more of the following measures:

•Turn the television or radio antenna until the interference stops.

•Move the equipment to one side or the other of the television or radio.

•Move the equipment farther away from the television or radio.

•Plug the equipment into an outlet that is on a different circuit from the television or radio. (That is, make certain the equipment and the television or radio are on circuits controlled by different circuit breakers or fuses.)

Modifications to this product not authorized by Cisco Systems, Inc. could void the FCC approval and negate your authority to operate the product.

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Cisco 1750 Router Hardware Installation Guide Page Cisco 1750 Router Hardware Installation Guide Page Commands Router MemoryCabling Specifications Problem SolvingTechnical Specifications Ethernet CablesLocating Modules C-v Viii About This Guide Related Publications Audience and ScopeOrganization Conventions Xii Xiii Commands DescriptionCisco 1750 Router Overview Key Features Feature DescriptionIii Ethernet Connector/Slot Label/Color DescriptionRear-Panel Ports and LEDs AUXConnector/Slot LED Label Color DescriptionColor Supported LED Meaning Front-Panel LEDsCards Slotø Portø ACTCOL IsdnVIC-2E&M SLOT1 PortøVIC-2E&M VIC-2FXO VIC-2FXS SLOT2 Portø VIC-2FXO VIC-2FXS PORT1Router Memory Types of MemoryAmounts of Memory 1750# show versionAdditional Required Equipment Equipment When You Use ItUnpacking the Router Types, refer to the Cisco WAN Interface Cards Hardware NT1Installation Before Installing the RouterConnecting the Router to Your Local Network Iii Connecting the Router to the Local Network Installing WICs and VICs Safety InformationInstalling WICs and VICs Removing a WIC or VIC Slot Cover Connecting Power to the Router Connecting Power to the RouterConnecting the Power Supply Verifying Your Installation Optional Installation StepsConnecting a PC Connecting the Console Cable to the Router Connecting a Modem 1750Wall-Mounting Wall-Mount Brackets-Bottom of Router78-6169-02 Xvi Troubleshooting Contacting Cisco or Your ResellerRecovering a Lost Password Changing the Configuration RegisterConfiguration register is Resetting the Router Resetting the Password Problem Solving Resetting the Configuration Register ValueOK LED Diagnostics Number of Blinks MeaningTroubleshooting WICs and VICs Router#show diag SlotSymptom Possible Solutions Cisco WAN Interface Cards Hardware Installation GuideTroubleshooting the Power System Compliance and Safety Information for the Cisco 1600Troubleshooting Isdn Isdn U Symptom Check the Following Possible SolutionsIsdn S/T Use show isdn status Xiv Technical Specifications Description SpecificationCisco 1750 Router Hardware Installation Guide 78-6169-02 Cabling Specifications Ethernet CablesEthernet Network Cabling Guidelines RJ-45 Pin Signal DirectionSpecification 10BaseT 100BaseTX TX+ RX+UTP Signal RJ-45 Pin DB-9 Pin DB-25 PinConsole Cable and Adapters Console TerminalTXD RXD GND DSR DTR CTS RTS Identifying a Rollover CableShows how to connect the VICs to the network VIC Cables and PinoutsPin Signal Pin Signal DescriptionLead Signaling output Signaling ground Return Viii Installing and Upgrading Memory and Data Modules Safety InformationPage Opening the Chassis Removing the Chassis Screws Locating Modules Cisco 1750 Motherboard-Module LocationsInstalling a Mini-Flash Module Removing a Mini-Flash ModuleRemoving a Mini-Flash Module Installing a Mini-Flash Module Installing a Dual In-Line Memory Module Installing a DimmInstalling a Packet Voice Data Module Installing a PvdmClosing the Chassis Closing the Chassis D E Enable Enable secret Isdn switch-type IOS OK LED Index Index

CISCO1750 specifications

The Cisco Systems CISCO1750 is a versatile, high-performance router designed to meet the needs of medium-sized businesses and enterprise environments. Known for its reliability and scalability, the CISCO1750 serves as a gateway to advanced networking solutions, offering a range of features and technologies that enhance functionality and connectivity.

One of the main characteristics of the CISCO1750 is its modular design, allowing users to customize the router according to their specific requirements. With various interface cards and network modules available, users can expand the router's capabilities to accommodate additional connections and services. This modularity makes the CISCO1750 a cost-effective solution, as organizations can invest in the hardware they need without overspending on unnecessary features.

The CISCO1750 supports multiple WAN interfaces, including T1/E1 and DSL connections, making it suitable for diverse network environments. It also includes integrated Ethernet switching, supporting both Fast Ethernet and Gigabit Ethernet interfaces. This allows the router to handle high-speed data transfers efficiently while ensuring reliable connectivity between various local devices.

In terms of software capabilities, the CISCO1750 runs on the Cisco IOS (Internetwork Operating System), providing advanced routing protocols like OSPF, EIGRP, and BGP. This enables the router to efficiently manage network traffic, optimize performance, and ensure high availability. The inclusion of advanced security features, such as IPsec VPN support and access control lists, helps safeguard sensitive data while maintaining robust network integrity.

Scalability is another key feature of the CISCO1750. As organizations grow and their networking needs evolve, the router can adapt by supporting additional users and devices. The device can also be integrated with other Cisco products for a unified networking infrastructure, ensuring seamless operations across the entire organization.

The CISCO1750 is designed with a focus on ease of management. Users can configure and monitor the device through a user-friendly command-line interface or GUI-based management tools. Additionally, the router supports SNMP (Simple Network Management Protocol), enabling administrators to monitor network performance and troubleshoot issues effectively.

In summary, the Cisco Systems CISCO1750 is a powerful and flexible router that meets the demands of modern enterprise networking. With its modular design, support for various interfaces, advanced routing capabilities, robust security features, and ease of management, it stands out as a reliable choice for organizations looking to enhance their network infrastructure.
Top Page Image Contents