Cisco Systems OL-4387-02 manual Configuring SSG TCP Redirect, 10-6

Chapter 10 SSG TCP Redirect

Configuring SSG TCP Redirect

To configure SSG TCP Redirect, use the following commands beginning in global configuration mode:

	Command	Purpose
Step 1
	Router(config)# ip cef	Enables Cisco Express Forwarding (CEF).
Step 2
	Router(config)# ssg enable	Enables SSG functionality.
Step 3
	Router(config)# ssg tcp-redirect	Enables the SSG TCP Redirect feature.
Step 4
	Router(config-ssg-redirect)# server-group	Defines the captive portal group.
	group-name
	Router(config-ssg-redirect-group)# server	Adds a server to a captive portal group.
	ip-address
Step 5
	Router(config-ssg-redirect)# redirect	Selects a captive portal group for redirection of traffic from
	unauthenticated-user to group-name	unauthenticated users.
Step 6
	Router(config-ssg-redirect)# port-list	Defines a port list.
	port-listname
	Router(config-ssg-redirect-port)# port	Adds a port to the port list.
	port-number
	Router(config-ssg-redirect)# redirect	Configures a TCP port for SSG TCP redirection.
	port port-number to group-name
	Router(config-ssg-redirect)# redirect	Configures a TCP port list for SSG TCP redirection.
	port-listport-listname to group-name
Step 7
	Router(config-ssg-redirect)# redirect	Selects the default captive portal group for initial captivation of
	captivate initial default group	users upon initialization.
	group-name duration seconds
Step 8
	Router(config-ssg-redirect)# network-list	Defines a network list.
	network-listname
	Router(config-ssg-redirect-network)#	Adds a network IP address to the network list.
	network ip-address
Step 9
	Router(config-ssg-redirect)# redirect	Specifies a list of destination IP networks to be redirected by the
	unauthorized-service [destination	captive portal group.
	network-listnetwork-listname]to
	group-name

For more detailed information, refer to the SSG TCP Redirect for Services, Release 12.2(4)B feature module.

Cisco 10000 Series Router Service Selection Gateway Configuration Guide

10-6 OL-4387-02