Regulatory Standards Compliance

The Cisco MWR 1900 router is in compliance with the national and international standards described in Table 1.

Table 1 Class A Regulatory Standards Compliance

Specification	Standard

Regulatory Compliance	Products bearing the CE mark indicate
	compliance with the 1999/5/EEC directives,
	which include the following safety and EMC
	standards.

Safety	UL/CUL 60950, Third Edition
	EN 60950:1992 with amendments 1, 2, and 3
	IEC 950:1991 with amendments 1, 2, and 3 with
	all national deviations and group differences for
	all countries participating in the CB scheme

EMI	EN300386:2000
	CISPR22 Class A
	V-3 Class A (VCCI Japan)
	47CFR15 Class A (FCC)
	47CFR68 (FCC)

Immunity	EN61000 4-2 Electrostatic Discharge
	EN61000 4-3 Radiated Susceptibility
	EN61000 4-4 Electrical
	EN61000 4-5 Surges
	EN61000 4-6 Injected RF Swept Immunity

Telecom (E1)	TBR12, TBR13

Telecom (T1)	TIA/EIA-IS-968
	JATE1

1.For specifics on the Cisco MWR 1900 router JATE approval, see the “JATE Certification” section on page 5.

The Cisco MWR 1900 router complies with the following standards:

•FCC Class A Compliance, page 3

•FCC Part 68 Notice, page 3

•EMC Environmental Conditions, page 4

•FCC Class A Warning, page 4

•CISPR 22 Class A Warning, page 5

•JATE Certification, page 5

Regulatory Standards Compliance

2	78-13978-03

Specification