Cisco Systems OL-10729-01 Frame Relay over MPLS, A-18, Configuration Configlets Comments, Up-E

Page 18

Frame Relay over MPLS

Appendix A Sample Configlets

Frame Relay over MPLS

Frame Relay over MPLS

Configuration

Configlets

Comments

•Service: L2VPN

•Feature: Frame Relay over MPLS (FRoMPLS, a type of AToM)

•Device configuration:

–The N-PE is a CISCO7200 with IOS 12.0(28)S

–No CE

–No U-PE

–L2VPN point-to-point (ATMoMPLS)

–C7200 (ATM2/0)

UP-E	N-PE

(None)	interface Serial1/1
	exit
	!
	connect C1_89001 Serial1/1 135 l2transport
	xconnect 99.99.4.99 89001 encapsulation
	mpls

•The N-PE is any MPLS-enabled router.

•L2VPN provisioning is on the serial port for the Frame Relay connection.

	Cisco IP Solution Center Metro Ethernet and L2VPN User Guide, 4.2
A-18	OL-10729-01

Image 18

Contents Overview Sample ConfigletsA P P E N D I X A Page UP-E Configuration ConfigletsERS Point-to-Point N-PEERS Point-to-Point with UNI Port Security Appendix A Sample ConfigletsERS Point-to-Point with UNI Port Security A user-defined PACL entry is added to the default PACL Configuration Configlets Comments EWS Point-to-PointConfiguration EWS Point-to-Point with UNI Port Security, BPDU Tunnelingswitchport port-security aging time Configletsswitchport port-security maximum switchport port-securityFeature EWS hybrid. One side is EWS UNI the other side is ERS NNI EWS HybridService L2VPN/Metro Ethernet Device configurationComments Configlets EWSA-10 EWS HybridConfiglets ERS A-11VPLS Multipoint ERS A-12VPLS Multipoint EWS with BPDU Tunneling A-13ERS with 11 VLAN Translation A-14ERS with 21 VLAN Translation A-15ATM over MPLS VC Mode A-16ATM over MPLS VP Mode A-17Frame Relay over MPLS A-18Frame Relay DLCI Mode A-19A-20