Cisco Systems MPC-273 manual Detailed Steps, MPC-278

Implementing MPLS VPNs over IP Tunnels on Cisco IOS XR Software

How to Configure MPLS VPNs over IP Tunnels

9.export route-target[0-65535.0-65535:0-65535 as-number:nn ip-address:nn]

10.end or commit

DETAILED STEPS

	Command or Action	Purpose
Step 1
	configure	Enters global configuration mode.
	Example:
	RP/0/RP0/CPU0:router# configure
Step 2
	vrf vrf-name	Specifies a name assigned to a VRF.
	Example:
	RP/0/RP0/CPU0:router(config)# vrf vrf-name
Step 3
	address-family ipv4 unicast	Specifies an IPv4 address-family address.
	Example:
	RP/0/RP0/CPU0:router(config-vrf)#
	address-family ipv4 unicast
Step 4
	import route-target[0-65535.0-65535:0-65535	Configures a VPN routing and forwarding (VRF) import
	as-number:nn ip-address:nn]	route-target extended community.
	Example:
	RP/0/RP0/CPU0:router(config-vrf-af)# import
	route-target 500:99
Step 5
	export route-target[0-65535.0-65535:0-65535	Configures a VPN routing and forwarding (VRF) export
	as-number:nn ip-address:nn]	route-target extended community.
	Example:
	RP/0/RP0/CPU0:router(config-vrf-af)# export
	route-target 700:44
Step 6
	exit	Exits interface configuration mode.
	Example:
	RP/0/RP0/CPU0:router(config-vrf-af)# exit
Step 7
	address-family ipv6 unicast	Specifies an IPv6 address-family address.
	Example:
	RP/0/RP0/CPU0:router(config-vrf)#
	address-family ipv6 unicast

	Cisco IOS XR MPLS Configuration Guide
MPC-278	OL-12284-01