Required Tools and Equipment

In addition to the rack-mounting brackets, you need the following tools and equipment to rack-mount the router:

•Number 2 Phillips screwdriver

•Screws to fit your rack

Rack Mounting the Chassis

You can mount the Cisco MWR 1941-DC router in a 19-inch rack that conforms to EIA-310-D specification (the inside width of the rack should be 17.72 to 17.80 inches per the EIA-310-D specification). The MWR 1941-DC router requires this minimum width and occupies 1U (1.75 inches) of vertical space.

Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable. The following guidelines are provided to ensure your safety:

This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of the rack.

If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack.

Cisco MWR 1941-DC Mobile Wireless Edge Router Rack Mounting Instructions

4	78-15841-02