Billion Electric Company 7000 user manual Test IP connect to PPP, Test IP connect to Ethernet

Page 27

your service provider through DHCP or your DSL modem is assigned a valid IP address statically.

If this test returns FAIL, run this test again a few minutes after this test is completed. If this test returns FAIL consistently and DHCP client is turned on in your DSL modem, check with your service provider. If this test returns FAIL consistently and your DSL modem is statically assigned an IP address, make sure the IP address is the correct one assigned by your service provider.

This test returns SKIPPED if “Ethernet connect to AAL5” test does not return PASS.

Test IP connect to PPP

This test returns PASS if your DSL modem has been assigned a valid IP address by your service provider through DHCP or your DSL modem is assigned a valid IP address statically.

If this test returns FAIL, run this test again a few minutes after this test is completed. If this test returns FAIL consistently and DHCP client is turned on in your DSL modem, check with your service provider. If this test returns FAIL consistently and your DSL modem is statically assigned an IP address, make sure the IP address is the correct one assigned by your service provider.

This test returns SKIPPED if “Ethernet connect to AAL5” test does not return PASS.

Test IP connect to Ethernet

This test returns PASS if the gateway can be reached through ping request. The gateway is assigned by your service provider, or obtained from your service provider by PPP negotiation or DHCP negotiation.

If this test returns FAIL, run this test again a few minutes after this test is completed. If this test returns FAIL consistently and your DSL modem seems not working, check to make sure your statically assigned IP address is configured correctly or DHCP client is turned on with the current VC.

This test returns SKIPPED if "IP connect to PPP" or "IP connect to Ethernet" test does not return PASS.

23

Image 27
Contents Bipac Page Table of Contents Product Support Package Contents Billion Adsl USB Modem FeaturesFront Panel LEDs Information from ISPMeaning Installing Billion Adsl USB Modem InstallationFor Windows Installing Billion Adsl USB Modem DriversFor Mac OS For Mac OS Page For Linux Redhat 7.1/7.2/8.0/9.0 Billion Adsl USB Modem Configuration Configuration For WindowsBillion BIPAC-7000 Adsl USB Modem Adsl USB WAN Adapter Configuration ISP setting in WAN site Configuring the Network PropertiesFactory Default Settings Web Configurator User Name Password AdministratorPPPoA VC-Mux PPPoE VC-MuxPPPoE LLC PPPoE NoneConfiguring with Web Browser Status Adsl Status Status HomeStatus PPP Service Category Select UBR or CBR Configuration WAN ConfigurationPPP Subnet Mask Default at Configuration LAN ConfigurationConfiguration DNS Configuration IP Address Default atSystem Diagnostic Test System Password ConfigurationChecking Adsl Connection Testing Adsl Synchronization Checking LAN Connection Testing Ethernet LAN connectionTest PPP Layer connection Test ATM OAM End-to-End Loop BackTest Ethernet connect to ATM Test PPPoE connectionTest IP connect to Ethernet Test IP connect to PPPSystem System Log Advance WAN StatusAdvance ATM Status Advance TCP Status Advance Adsl ConfigurationSave Settings Contact Billion Product Support