Cisco Systems ONS 15454 appendix 17 15454MRC-12 Card Specifications

Appendix A Hardware Specifications

A.6.17 15454_MRC-12 Card Specifications

–1535.82 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1535.82

–1536.61 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1536.61

–1538.19 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1538.19

–1538.98 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1538.98

–1539.77 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1539.77

–1540.56 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1540.56 ITU grid red band:

–1550.12 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1550.12

–1550.92 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1550.92

–1551.72 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1551.72

–1552.52 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1552.52

–1554.13 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1554.13

–1554.94 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1554.94

–1555.75 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1555.75

–1556.55 +/– 0.040 nm, OC192 LR/STM64 LH ITU 1556.55

A.6.17 15454_MRC-12 Card Specifications

The 15454_MRC-12 card has the following specifications:

•Line

–Bit rate: up to OC-48 (2488.320 Mbps), depending on SFP

Note Each optical interface on the card can be configured as OC-3, OC-12, or OC-48, depending on the available backplane bandwidth and existing provisioned lines. In general, the card supports all different rates on the line side as long as the accumulated bandwidth does not exceed the total backplane allowed bandwidth.

–Fiber: 1550-nm single-mode

–Connectors: LC duplex connector for each SFP

–Compliance: Telcordia GR-253-CORE

•Transmitter

–Maximum transmitter output power: Depends on SFP (see A.2 SFP, XFP, and GBIC Specifications, page A-4)

–Minimum transmitter output power: Depends on SFP (see A.2 SFP, XFP, and GBIC Specifications, page A-4)

–Center wavelength: See wavelength plan

–Center wavelength accuracy: 1 nm to 4 nm, depending on SFP

–Transmitter: FP and DFB laser

•Receiver

Cisco ONS 15454 Reference Manual, R8.0

A-44 April 2008