Cisco Systems UBR7100E Flash Disks, Memory Size Product Number Spare Product Number

Page 9

Chapter 1 Product Overview

Field-Replaceable Units

Table 1-1 Port Adapters Used with the Cisco uBR7100 Series Universal Broadband Router (continued)

WAN Technology

Product Description

End of Life

 

 

 

ATM

 

 

 

 

 

 

PA-A3-E3—1-port E3 ATM, PCI-based, single-width port adapter, that uses an E3

No

 

interface with a coaxial cable BNC connector.

 

 

 

 

 

PA-A3-OC3MM—1-port OC-3c ATM, PCI-based multimode port adapter

No

 

 

 

 

PA-A3-OC3SMI—1-port OC-3c ATM, PCI-based single-mode intermediate reach port

Yes

 

adapter

 

 

 

 

 

PA-A3-OC3SML—1-port OC-3c ATM, PCI-based single-mode long reach port adapter

No

 

 

 

 

PA-A3-8T1/IMA—ATM inverse multiplexer over ATM port adapter with 8 T1 ports

No

 

 

 

Packet-over-SONET

 

 

 

 

 

 

PA-POS-OC3SMI—1-port OC3 single-mode, intermediate reach port adapter

No

 

 

 

Flash Disks

 

 

The flash disk is the default memory device that ships with your Cisco uBR7100 series router.

 

 

Cisco uBR7100 series routers support two installed PCMCIA flash disks that contain the default

 

 

Cisco IOS software image. Flash disks can be installed in slot 0 and slot 1 of the PCMCIA card slots

 

 

located at the back of the router. Slot 0 is the top slot and slot 1 is the bottom slot.

 

 

To ensure proper electromagnetic compatibility (EMC), the PCMCIA card slot has a cover that is

 

 

secured with a captive screw.

 

 

 

 

 

 

 

 

Tip

 

The flash disk slots are physically identified as slot 0 and slot 1, but they are addressed as disk0 and

 

 

disk1, respectively, when accessing the flash disks with Cisco IOS commands.

 

 

 

 

 

 

 

 

For procedures that explain the installation and use of the flash disk, see the “Flash Memory Card Usage”

 

 

section on page 6-5. Also see the Using the Flash Disk document that accompanies every flash disk

 

 

shipped from the factory.

 

 

 

 

 

Table 1-2lists the flash disk memory options and their product numbers.

 

 

Table 1-2 Flash Disk Memory Options

 

 

 

 

 

 

 

 

 

 

Memory Size

Product Number

Spare Product Number

 

 

 

 

 

 

 

 

48 MB

MEM-7100-FLD48M

MEM-7100-FLD48M=

 

 

 

 

 

 

 

 

64 MB

MEM-7100-FLD64M

MEM-7100-FLD64M=

 

 

 

 

 

 

 

 

128 MB

MEM-7100-FLD128M

MEM-7100-FLD128M=

 

 

 

 

 

 

Cisco uBR7100 Series and Cisco uBR7100E Series Universal Broadband Router Hardware Installation Guide

 

OL-5916-01

1-9

 

 

 

Image 9
Contents Product Description Product OverviewCisco uBR7100 Series Models Cisco uBR7100 Series Router Operational FeaturesCisco uBR7100 Series Routers Physical Description DS0 RF Cisco uBR7100 Series Front Panel Fixed Interface Units Ethernet/Fast Ethernet LAN InterfaceRF Cable Interface Port Adapters Field-Replaceable UnitsWAN Technology Product Description End of Life Memory Size Product Number Spare Product Number Flash DisksSdram Memory Total Sdram Memory Configuration Product NumberFunctional Overview Rack-Mount and Cable-Management KitChassis Slot and Logical Interface Numbering Indentifing Interface Information in the Software MAC Addresses Peripheral Component Interconnect Buses Online Insertion and RemovalNetwork Processor Card Memory Type Size Quantity Description Location FrontRouter# show version Other InterfacesDS0 RF System LEDs and Reset ButtonSYS RDY LED Label Color State FunctionOL-5916-01
Related manuals
Manual 138 pages 13.08 Kb