Billion BIPAC 7100SG/7100G 802.11g ADSL Router
Configuring Your ADSL Router
To configure this device, you must have IE 5.0 /
Netscape 4.5 or above installed
Verifying Your Local Network Connection with the Device
To see if this ADSL Router is visible on the local network, go to Start / Run. In the Run dialog box, type “ping 192.168.1.254” then press OK.
A command prompt window will pop out. If your ping is successful which means your local network is able to reach to the device, then the command prompt window will close up automatically.
Connection fails, when you see “Request timed out” in the command prompt window. You may need to check your set up.
11