Chapter 1 Cisco 831 Router and Cisco SOHO 91 Router Cabling and Setup Quick Start Guide
Configure the Router
Figure 1-5 CRWS Dashboard Page
Tip If the CRWS dashboard page does not appear when you enter the URL http://10.10.10.1, test the connection between the PC and the router by doing the following:
•Check that the OK LED on the router is on, and check the cable connection between the router and the PC.
•If the CRWS home page still does not appear, verify that the web browser’s “work offline” option is disabled.
•If the web page still does not appear, verify that the PC is configured to automatically receive an IP address. Select Start/Run, type winipcfg in the Run window, and examine the address in the IP address field. The address should be in the format 10.10.10.X, in which X is a number that is 2 or greater; for example, 10.10.10.2 or 10.10.10.3. If the IP address is not in this format, Follow the instructions in the Tip on page
Step 4 If you have no special configuration requirements, click the Router Setup link on the home page, and then click Quick Setup. Then, enter the username and password provided to you by your Internet service provider, and follow the instructions that appear in the page that is displayed.
Step 5 If you need to configure special features such as Network Address Translation (NAT), click the appropriate links on the home page, and complete the configuration screens.
Step 6 Click the Router Password link on the home page, and set a password for the router.
Cisco 831 Router and Cisco SOHO 91 Router Cabling and Setup Quick Start Guide
| ||
|