Billion Electric Company 5102S, 5102G quick start Product Support and Contact Information

Page 14
Verifying Your Local Network Connection with the Device

Quick Start Guide

Verifying Your Local Network Connection with the Device

To see if this ADSL Router is visible on the local network, go to Start / Run. In the Run dialog box, type “ping 192.168.1.254” then press OK.

A command prompt window will pop out. If your ping is successful which means your local network is able to reach to the device, then the command prompt window will close up automatically.

Connection fails, when you see “Request timed out” in the command prompt window. You may need to check your set up.

Product Support and Contact Information

Most problems can be solved by referring to the Troubleshooting section in the User’s Manual. If you cannot resolve the problem with the Troubleshooting chapter, please contact the dealer where you purchased this product.

Contact Billion

WORLDWIDE

http://www.billion.com

Mac OS is a registered Trademark of Apple Computer, Inc.

Windows 98, Windows NT, Windows 2000, Windows Me and Windows XP are registered Trademarks of Microsoft Corporation.

12

Image 14
Contents Quick Start Guide BIPAC 5102 / 5102S / 5102G802.11g ADSL2+ Modem/Router Page Package Contents Billion BIPAC 5102 / 5102S / 5102G ADSL2+ Modem/RouterMeaning The Front LEDsBIPAC BIPAC 5102S BIPAC 5102G BIPAC 5102S The Rear PortsBIPAC BIPAC 5102GConnecting BIPAC Connecting BIPAC 5102S Connecting BIPAC 5102G 3. In the Local Area Connection Status window, click Properties Configuring PC in Windows XP6. Click OK to finish the configuration Configuring PC in Windows 1. Go to Start / Settings / Control Panel. In the Control Configuring PC in Windows 98/Me Configuring PC in Windows NT4.0 4.5 or above installed Configuring Your ADSL Firewall RouterTo configure this device, you must have IE 5.0 / Netscape Product Support and Contact Information Verifying Your Local Network Connection with the Device