Factory Default Settings
Before configuring your router, you need to know the following default settings.
Web Interface (Username and Password)
Username: admin
Password: admin
The default username and password are “admin” and “admin” respectively.
Device LAN IP settings
IP Address: 192.168.1.254
Subnet Mask: 255.255.255.0
ISP setting in WAN site
PPPoE
DHCP server
DHCP server is enabled.
Start IP Address: 192.168.1.100
IP pool counts: 100
LAN and WAN Port Addresses
The parameters of LAN and WAN ports are
| LAN Port | WAN Port | |
IP address | 192.168.1.254 |
| |
Subnet Mask | 255.255.255.0 | The PPPoE function is | |
DHCP server function | Enabled | enabled to automatically get | |
|
| the WAN port configuration | |
IP addresses for | 100 IP addresses continuing | ||
from the ISP. | |||
from 192.168.1.100 through | |||
distribution to PCs |
| ||
192.168.1.199 |
| ||
|
|
17