Scope of this Guide
Table 1 | Conventions Used in this Guide (continued) |
| |
|
|
|
|
Convention |
| Definition | Sample |
|
|
|
|
{ } |
| Braces indicate a required choice. |
|
|
|
|
|
[{ }] |
| Braces within a bracket indicate a required | [{letter\number}Enter] |
|
| choice within an optional element. |
|
|
|
|
|
Notes, Warnings, and Cautions
This section explains the conventions used for notes, warnings, and cautions.
Note A Note highlights helpful information, such as suggestions or references to material not covered in the guide.
Tip A Tip contains information that might help you solve a problem or save time.
Caution A Caution emphasizes a situation in which equipment can be damaged or data can be corrupted or lost.
Warning A Warning emphasizes a safety concern, where a very serious and hazardous situation could result if instructions are not carefully adhered to.
Notes about Warnings
Warnings used in this document are translated into many languages in the Regulatory Compliance and Safety Information for Cisco Multiservice Switch Products (MGX, BPX, and SES).
There are 3 types of Warnings in hardware guides:
•EMC (electromagnetic compatibility)
•Safety
•Telecom
Warning statements are numbered. The numbering makes it clearer which Warning translation goes with which source Warning.
Scope of this Guide
This guide consolidates the following guides into one document and adds information about MGX Release 5 (and greater) hardware features. Thus, this guide covers all MGX switches supported by software Release 2.0 through 5.1, and makes the following guides obsolete:
•Cisco MGX 8850 Hardware Installation Guide, Release 2
•Cisco MGX 8850 Hardware Installation Guide, Release 2.1
|
| Cisco MGX 8800/8900 Series Hardware Installation Guide |
|
|
|
|
|
| |||
| Releases 2 - 5.2, Part Number |
|
| xxxv |
|
|
|
|
|