Cisco Systems WSAS170K9, WSA S170 manual Maintenance Scenarios, Replacing the Hard Disk Drives

Page 46

Chapter

Maintenance Scenarios

Note Make sure that you replace the Cisco 170 series HDDs with Cisco supplied HDDs that are specific to and preconfigured for the Cisco 170 series appliance. Please contact Cisco Technical Support for more information or in case of an Return Merchandise Authorization (RMA). See the “Contacting Service and Support” section on page 4-3.

You may need to install, remove, or replace a HDD in your Cisco 170 series appliance under the following conditions:

If a single drive fails, you can replace the failed drive. You can hot-swap the failed drive.

If both drives fail simultaneously, you need to return the entire system via an RMA.

Note When you replace a drive, the disk indicator light is a blinking amber indicating a rebuild event. Once the rebuild is completed, the disk indicator light changes to a flashing green.

Replacing the Hard Disk Drives

The Cisco 170 series appliance has two HDDs in a RAID 1 configuration. If one of the HDDs fails, you can remove and install a new HDD.

Caution Make sure that you replace the failed hard disk drive as soon as possible; otherwise, if the remaining hard disk drive fails, all your data is lost.

To remove and install (replace) hard disk drives in the Cisco 170 series appliance, follow these steps:

Step 1 From the front panel of the Cisco 170 series appliance, remove the hard disk drive by pressing the button on the right side of the bay until the lever is released. Pull out the hard disk drive.

Figure 4-1shows the Cisco 170 series appliance with two HDDs.

Figure 4-1 Removing a HDD from the Cisco 170 Series Appliance

334566

Step 2 On the front panel of the Cisco 170 series appliance, line up the hard disk drive carrier with the hard disk drive bay and push it in until it is seated. Push the lever into place.

Cisco 170 Series Hardware Installation Guide

4-2

OL-28365-01

 

 

Image 46
Contents Cisco 170 Series Hardware Installation Guide Americas HeadquartersPage N T E N T S Attaching Inner Rails to the Appliance Document Objectives ContentsAudience Document Conventions Document OrganizationSection Title Description Installation Warnings Cisco 170 Series Hardware Installation Guide Circuit Breaker 15A Warning Xii Where to Find Safety and Warning Information Related DocumentationXiv Cisco 170 Series Appliance Cisco 170 Series OverviewCisco C170 Email Security Appliance Cisco M170 Content Security Management ApplianceCisco S170 Web Security Appliance Cisco 170 Series Appliance Panels Front Panel LEDsLED Rear Panel LEDs Rear Panel LEDs for Cisco C170, Cisco M170 and Cisco S170Rear Panel Ports Rear Panel and Ports for Cisco S170See the Management Interface section on Management Interface Alarm LEDHard Disk Drives Configuration, Logging, and Monitoring Hardware and Technical SpecificationsPower Supply Information InterfacesNon-Operating Conditions Specifications Cisco C170 Cisco M170 Cisco S170Environmental Operating Ranges Industry CertificationsPreparing for Installation Installation OverviewSafety Recommendations Maintaining Safety with ElectricityPreventing Electrostatic Discharge Damage Working in an ESD EnvironmentGeneral Site Requirements Preventive Site ConfigurationSite Environment AC Power Supply Power Supply ConsiderationsLocale Part Number Length Plug Rating Locale Part Number Length Plug Rating Plug Type AIR-PWR-CORD-S aConfiguring Equipment Racks Chapter Cisco 170 Series Hardware Installation Guide Installing and Connecting the Cisco 170 Series Appliance Verifying the Box ContentsAppliance Box Contents Disassembling the Slide RailAttaching Inner Rails to the Appliance Verifying the Rack Type Securing Round Hole Racks Securing Threaded Hole RacksRemove the square hole insert from the front of the rail Attaching the Outer Slide Rail to Threaded Hole Racks Installing the Appliance Securing the Appliance Rack Mounting the Cisco 170 Series Appliance Guidelines and RecommendationsAttaching the Rack-Mount Brackets Connecting the Interface Cables and Verifying Connectivity Cisco 170 Series Hardware Installation Guide Chapter Cisco 170 Series Hardware Installation Guide Fixed AC Power Supply Removing and Installing Hard Disk DrivesMaintenance Scenarios Replacing the Hard Disk DrivesContacting Service and Support Installing a HDD in the Cisco 170 Series ApplianceChapter Cisco 170 Series Hardware Installation Guide 10/100/1000BaseT Connectors Identifying Cable PinoutsSignal Pin Console Port RJ-45Signal RJ-45 Pin DB-9 Pin RJ-45 to DB-9Appendix Cisco 170 Series Hardware Installation Guide

WSAS170K9, WSA S170 specifications

Cisco Systems WSA S170, also known as WSAS170K9, is a next-generation web security appliance designed to safeguard organizations from web-based threats while ensuring secure and policy-compliant internet access. This device brings advanced features, robust technologies, and vital characteristics to help organizations protect their digital assets.

One of the key features of the WSA S170 is its real-time threat intelligence capabilities. Cisco's cloud-based security ecosystem provides continuous updates on emerging threats, ensuring that the appliance can effectively block malicious sites and protect users from phishing attacks. This proactive approach significantly enhances the organization's security posture.

The WSA S170 also excels in its content filtering capabilities. It allows IT administrators to set and enforce web access policies, ensuring that employees access only appropriate content. With customizable policies, organizations can minimize distractions, boost productivity, and comply with regulatory requirements.

Another essential aspect of the WSAS170K9 is its advanced malware protection. The appliance integrates with Cisco’s advanced threat protection tools to detect and remediate malware before it can inflict damage. This multi-layered defense strategy is crucial for maintaining a secure network environment.

Performance-wise, the Cisco WSA S170 is built to handle high traffic loads efficiently. With advanced caching technology, it reduces latency and improves bandwidth utilization, ensuring that users experience fast and uninterrupted internet access. This performance capability is critical for organizations that rely on web-based applications for their day-to-day operations.

In terms of ease of management, the WSAS170K9 features a web-based graphical user interface that simplifies configuration and monitoring. This intuitive interface enables IT teams to quickly analyze data, generate reports, and respond to security incidents efficiently.

Scalability is another significant characteristic of the Cisco WSA S170. As organizations grow, they can easily scale their web security solutions without a complete overhaul by integrating additional Cisco security products. This flexibility allows businesses to adapt to changing needs without compromising security.

In conclusion, the Cisco Systems WSA S170 (WSAS170K9) is a powerful web security appliance offering advanced features, real-time threat intelligence, effective content filtering, robust malware protection, high performance, user-friendly management, and scalability. These characteristics make it a vital tool for any organization looking to enhance its web security and ensure a safe browsing experience for its users.