Cisco Systems WEC600N manual Congratulations! The profile is Successfully configured

Chapter 3

Configuration

WPA2-Personal Security

Passphrase  Enter the network’s Passphrase (also called a pre-shared key) of 8-63 characters.

To connect to the network, click Connect. To cancel the connection, click Cancel.

WPA (Wi-Fi Protected Access)

If the network uses WPA Personal security, then the WPA-Personal Key Needed for Connection screen.

WPA-Personal Security

Passphrase  Enter the network’s Passphrase (also called a pre-shared key) of 8-63 characters.

To connect to the network, click Connect. To cancel the connection, click Cancel.

WEP (Wired Equivalent Privacy)

If the network uses WEP encryption, then the WEP Key or Passphrase Needed for Connection screen appears.

WEP Security

Passphrase  Enter the Passphrase or WEP key.

The passphrase is case-sensitive and must be 16 or fewer alphanumeric characters. It must match the passphrase of your other wireless network devices and is compatible with Linksys wireless products only. (For non-Linksys wireless products, enter the WEP key manually.)

If you enter the network’s WEP key, enter the appropriate number of hexadecimal characters (“0” to “9” and “A” to “F”). For 64-bit encryption, enter exactly 10 hexadecimal characters. For 128­‑bit encryption, enter exactly 26 hexadecimal characters.

To connect to the network, click Connect. To cancel the connection, click Cancel.

2. Click Finish.

Congratulations

Congratulations! The profile is

successfully configured.

Dual-Band Wireless-N ExpressCard 18