Cisco Systems WRT310N manual Static IP, PPPoE, Pptp

Page 9

Chapter 3

Advanced Configuration

Static IP

If you are required to use a permanent IP address to connect to the Internet, select Static IP.

Internet Connection Type > Static IP

Internet IP Address  This is the Router’s IP address, when seen from the Internet. Your ISP will provide you with the IP Address you need to specify here.

Subnet Mask  This is the Router’s Subnet Mask, as seen by users on the Internet (including your ISP). Your ISP will provide you with the Subnet Mask.

Default Gateway  Your ISP will provide you with the IP address of the ISP server.

DNS 1-3 Your ISP will provide you with at least one DNS (Domain Name System) server IP address.

PPPoE

Some DSL-based ISPs use PPPoE (Point-to-Point Protocol over Ethernet) to establish Internet connections. If you are connected to the Internet through a DSL line, check with your ISP to see if they use PPPoE. If they do, you will have to enable PPPoE.

Internet Connection Type > PPPoE

Username and Password  Enter the Username and Password provided by your ISP.

Service Name  If provided by your ISP, enter the Service Name.

Connect on Demand: Max Idle Time  You can configure the Router to cut the Internet connection after it has been inactive for a specified period of time (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as soon as you attempt to access the Internet again. To use this option, select Connect on Demand. In the Max Idle Time field, enter the number of minutes you want to have elapsed

before your Internet connection terminates. The default Max Idle Time is 15 minutes.

Keep Alive: Redial Period  If you select this option, the Router will periodically check your Internet connection. If you are disconnected, then the Router will automatically re-establish your connection. To use this option, select Keep Alive. In the Redial Period field, you specify how often you want the Router to check the Internet connection. The default Redial Period is

30seconds.

PPTP

Point-to-Point Tunneling Protocol (PPTP) is a service that applies to connections in Europe only.

Internet Connection Type > PPTP

If your ISP supports DHCP or you are connecting through a dynamic IP address, then select Obtain an IP Address Automatically. If you are required to use a permanent IP address to connect to the Internet, then select Specify an IP Address. Then configure the following:

•• Specify an IP Address  This is the Router’s IP address, as seen from the Internet. Your ISP will provide you with the IP Address you need to specify here.

•• Subnet Mask  This is the Router’s Subnet Mask, as seen by users on the Internet (including your ISP). Your ISP will provide you with the Subnet Mask.

•• Default Gateway  Your ISP will provide you with the IP address of the ISP server.

•• DNS 1-3 Your ISP will provide you with at least one DNS (Domain Name System) server IP address.

PPTP Server IP Address  Your ISP will provide you with the IP address of the PPTP server.

Username and Password  Enter the Username and Password provided by your ISP.

Connect on Demand: Max Idle Time  You can configure the Router to cut the Internet connection after it has been inactive for a specified period of time (Max Idle Time). If your Internet connection has been terminated due to

Wireless-N Gigabit Router

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Wireless-N Gigabit Router Icon Descriptions About This GuideOnline Resources Copyright and TrademarksTable of Contents Appendix E Software End User License Agreement Appendix D Regulatory InformationHorizontal Placement Placement PositionsChapter Product Overview Front PanelSuggested Mounting Hardware Wall-Mounting PlacementChapter Wireless Security Checklist General Network Security GuidelinesAdditional Security Tips How to Access the Web-Based Utility Chapter Advanced ConfigurationSetup Basic Setup Internet SetupStatic IP PPPoEPptp Optional Settings L2TPTelstra Cable Dhcp Server Setting Network SetupRouter IP Dhcp ReservationTime Setting Setup DdnsDdns Service DynDNS.orgSetup Advanced Routing Setup MAC Address CloneMAC Address Clone Advanced RoutingWireless Basic Wireless Settings Basic Wireless SettingsRouting Table Wireless Wireless Security Wi-Fi Protected SetupWireless Security WPA Enterprise WPA2 PersonalWPA2 Enterprise RadiusWireless MAC Filter Wireless Wireless MAC FilterAccess Restriction MAC Address Filter ListWireless Client List Advanced WirelessSecurity VPN Passthrough Security FirewallFirewall Internet FilterInternet Access Policy VPN PassthroughSummary Single Port Forwarding Applications and Gaming Single Port ForwardingApplications & Gaming Port Range Triggering Applications and Gaming Port Range ForwardingPort Range Forwarding Port Range TriggeringWireless QoS Quality of ServiceApplications and Gaming DMZ Applications and Gaming QoSCategory Internet Access PriorityRouter Access Administration ManagementWeb Access Remote AccessBackup and Restore Administration LogLog UPnPAdministration Factory Defaults Administration DiagnosticsReboot DiagnosticsAdministration Firmware Upgrade Status RouterStatus Local Network Wireless Network Status Wireless NetworkLocal Network Dhcp ServerYour computer cannot connect to the Internet Appendix a TroubleshootingWRT310N Appendix B SpecificationsLimited Warranty Obtaining Warranty ServiceExclusions and Limitations Technical Support Safety Notices FCC StatementFCC Radiation Exposure Statement Industry Canada Statement Wireless DisclaimerAvis d’Industrie Canada Industry Canada Radiation Exposure StatementDansk Danish Miljøinformation for kunder i EU Regulatory Information Norsk Norwegian Miljøinformasjon for kunder i EU Regulatory Information Cisco Products Appendix E Software End User License AgreementSoftware Licenses Schedule Cisco Software License AgreementSoftware End User License Agreement Software End User License Agreement Schedule Network Magic Features Schedule 3-A Schedule Open Source and Third Party LicensesGNU General Public License PreambleSoftware End User License Agreement No Warranty Schedule 3-B END of Schedule 3-AGNU Lesser General Public License Software End User License Agreement Software End User License Agreement Software End User License Agreement END of Schedule 3-B No WarrantySchedule 3-C OpenSSL LicenseOriginal SSLeay License END of Schedule 3-C
Top Page Image Contents