Cisco Systems WC-293 manual Pdn, Plim, Sonet, Pop, WC-311

Index

payload compression on a point-to-point interface, enabling WC-142

PDN
CMNS (example)	WC-279
datagram transport (figure) WC-222
X.25 WC-14
X.25, configuring	WC-214

permanent virtual circuit

See PVC

physical layer interface module

See PLIM

ping

X.25 over multiple serial lines (example) WC-287

PLIM

description, on the AIP WC-7

SONET

ATM WC-48point-to-multipoint signalling

ATM

configuring WC-32

point-to-point or multipoint subinterface, creating WC-133

Point-to-Point Protocol

See PPP

point-to-point subinterface with a DLCI, associating WC-135

poll timer

configuring WC-37

POP

with access restricted to one CUG (example) WC-285with multiple CUGs and no public access

	(example)		WC-285
with multiple CUGs and public access
	(example)		WC-286
with no CUG access (example)				WC-285
X.25	CUGs	WC-251
X.25	CUGs network subscription			WC-249
port command		WC-175
PPP
Frame Relay

DCE configuration

(example) WC-159DTE configuration

(example) WC-158frame format WC-131

PVC mapping, defining WC-132restrictions WC-130

ppp authentication chap command WC-69

PPPover ATM Cisco proprietary

configuring WC-72

(example) WC-108

configuring WC-68 to WC-73description WC-68IETF-compliant LLC encapsulated

configuring	WC-71
(example)	WC-106
IETF-compliant MUX encapsulated
configuring	WC-70
(example)	WC-102
virtual templates		WC-69
PPP over Frame Relay			WC-130
predictor compression			WC-207
preference command			WC-175
preferential CUGs		WC-251,WC-252
prefix command		WC-175
priority queueing
X.25 WC-248

privileged EXEC mode

summary xxvi

profiles

X.25 WC-246

prompts

system xxvi

protocol addresses

ATM

configuring WC-20

protocol command WC-20,WC-31,WC-33,WC-34pseudobroadcasting WC-3

Cisco IOS Wide-Area Networking Configuration Guide

WC-311