Removing AC and DC Power Supplies
Figure 2 Removing the Screw
Input:
Freq: 50/60 Hz
Current:
Watts: 40W
1
0
H9079
Screw
Step 2 Disconnect the power connector from the system board. (See Figure 3.) Grasp the sides of the power connector and pull upward while rocking the connector side to side.
Caution Do not pull on the connector wires.
Figure 3 Disconnecting the Power Connector
AC power supply
Fan
H9081
Power connector
Fan connector
Step 3 Push the loosened power supply backward and lift it out of the chassis. (See Figure 4.)
4Installing Cisco AC and DC Power Supplies in Cisco 2500 Series Routers