Cisco Systems 1721 manual Feature, Description

Chapter 1 Cisco 1721 Router Overview

		Key Features
Table 1-1 Key Features
	Feature	Description
	One Fast Ethernet	• Operates in full- or half-duplex mode (with manual
	(10/100BASE-TX) port	override available).
		• Supports autosensing for 10- or 100-Mbps operation.
		• Supports IEEE 802.1Q VLAN encapsulation.
	Two Cisco WAN interface card	• Supports a combination of any two of the following WICs:
	(WIC) slots	ISDN BRI, 56-kbps DSU/CSU, FT1/T1 DSU/CSU,
		high-speed serial, dual-serial, ADSL, G.SHDSL, and
		Ethernet.
		• The WAN interface configuration can be changed as your
		network requirements change.
	Console port	Supports router configuration and management with a
		directly-connected terminal or PC. Supports up to 115.2 kbps.
	Auxiliary port	Supports modem connection to the router, which can be
		configured and managed from a remote location. Supports up to
		115.2 kbps.
	VPN hardware-assisted 3DES	Provides IPSEC DES and 3DES hardware encryption.
	encryption module
	SNMP support	Router can be managed over a network using Simple Network
		Management Protocol (SNMP).
	AutoInstall support	Configuration files can be easily downloaded to the router over
		a WAN connection.
	Kensington security slot	Router can be secured to a desktop or other surface using
		Kensington lockdown equipment.
	Cisco ConfigMaker support	You can set up networks that include the Cisco 1721 router
		using the Cisco ConfigMaker application, a wizards-based
		software tool that helps you easily configure and address Cisco
		routers, access servers, hubs, switches, and networks.
	Support for Cisco IOS software	Supports IP, IPX, AppleTalk, IBM, Open Shortest Path First
	features	(OSPF), NetWare Link Services Protocol (NLSP), Resource
		Reservation Protocol (RSVP), encryption, network address
		translation, and the Cisco IOS Firewall Feature Set.
		Cisco 1721 Router Hardware Installation Guide
	78-13834-02		1-3