Cisco Systems 1760 quick start Installing WIC/VIC Cards, Safety Information

Page 6

Figure 4 Attaching the Cable Guide to the Router

PWR

OK

PVDM0

PVDM1

 

 

 

 

 

 

 

 

 

OK

OK

MOD

SLOT0

 

 

 

 

 

 

 

 

OK

0

1

 

 

 

 

 

 

 

 

OK

SLOT1

0

 

 

 

 

 

 

 

 

 

OK

 

1

ACT

COL

FDX

 

 

 

100

LINK

 

 

 

CONSOLE

10/100 ETHERNET AUX

Cisco

Series

1700

SLOT2

0

1

 

 

 

OK

 

 

SLOT3

0

1

 

 

 

OK

 

65286

Cable guide screw

5Installing WIC/VIC Cards

The router has four card slots that hold Cisco WICs and VICs. Either one or two WICs may be installed, with the remaining slots holding VICs, as desired. If no WICs are present in the slots, up to four VICs may be installed. Each WIC has one or two WAN ports, and each VIC has two or more voice ports. This section describes the procedure for installing a WIC or a VIC in the router.

Note For details on specific WICs and VICs, on how to connect a WIC to the WAN line or a VIC to the telephone and fax line, and on how to configure the interface with Cisco IOS software, refer to the Cisco WAN Interface Cards Hardware Installation Guide that came with the cards.

Safety Information

This section lists safety warnings that you should be aware of before installing WICs or VICs in the router. To see translated versions of these warnings, refer to the Regulatory Compliance and Safety Information for the Cisco 1700 Routers document that came with the router.

Warning

Before working on a system that has an on/off switch, turn off the power and unplug the power cord.

Warning

Warning

Warning

Only trained and qualified personnel should be allowed to install or replace this equipment.

Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and watches). Metal objects will heat up when connected to power and ground and can cause serious burns or weld the metal object to the terminals.

Before opening the chassis, disconnect the telephone-network cables (from the card) to avoid contact with the telephone-network voltages.

Warning

Do not work on the system or connect or disconnect cables during periods of lightning activity.

6

Image 6
Contents Cisco 1760 Modular Access Router Cabling and Installation Replacement, Repair, or Refund Policy for Hardware Cisco One-Year Limited Hardware Warranty TermsDuration of Hardware Warranty To Receive a Return Materials Authorization RMA NumberMounting the Router in a Rack Parts ListOverview Product Serial Number LocationAttaching Brackets to the Router Bracket Mounting PointsAttaching Brackets to the Rack Attaching the Optional Cable GuideInstalling WIC/VIC Cards Safety InformationCard Installation Removing a WIC or VIC Slot CoverConnecting the Router to Your Local Network Voice Port VerificationConnect Power and Verify Installation Power supply is designed to work with TN power systemsDocument that came with the router Connecting the Power Supply StepConnecting the Console Cable to the Router Connect a PC to the Router Console PortPerform Initial Configuration Initial Configuration Using Cisco CLI-Manual ConfigurationVerifying the Initial Configuration Use the CLI to Configure VoIP Saving the ConfigurationInformation for International Users Configuring the Fast Ethernet Interface Configuring a Dial PlanCommand Purpose Configuring Voice Interface Cards Wildcards and Number ExpansionConfiguring FXS Interfaces Shows a typical VICLocal Dial Peers Telephone Number Voice PortVoice Port Dial-Peer Tag FXS VIC Checking the Local Dial Peer Configuration Calling Between RoutersDestination Pattern Voice Port Dial-Peer Tag Remote Location Destination Pattern IP Address Dial-Peer TagOther Routers on the Network IP Address Dial-Peer TagConfiguring FXO Interfaces Checking the Remote Dial Peer ConfigurationConfiguring E&M Interfaces Checking the FXO ConfigurationCommand Task Linking PBXs over the IP Network Remote Dial Peers Configuring Isdn BRI NT/TE Interfaces Checking the E&M ConfigurationTurning the Line Power On/Off Configuring the BRI LayerConfiguring the Isdn Protocol Setting the Network Clock PriorityConfiguration Example Command DescriptionConfiguring did Interfaces Debugging CommandsConfiguring a Voice Port to Support did Verifying did Voice Port ConfigurationPrerequisites Configuring Quality of Service Configuring LLQ IP PrecedenceLow Latency Queuing Multilink PPP with Link Fragmentation Interleave Configuring Mlppp with LFIConfiguring RTP Header Compression Real-Time Transport Protocol Header CompressionFrame Relay Configuration for VoIP Obtaining DocumentationCisco.com Documentation DVD Documentation FeedbackCisco Product Security Overview Ordering DocumentationReporting Security Problems in Cisco Products Obtaining Technical AssistanceCisco Technical Support Website Submitting a Service Request Definitions of Service Request SeverityObtaining Additional Publications and Information Page Page USA
Related manuals
Manual 112 pages 3.8 Kb

1760 specifications

The Cisco Systems 1760 series routers are part of Cisco’s popular line of integrated services routers, designed primarily for small to medium-sized businesses and branch offices. The 1760 series was introduced to provide robust connectivity and routing solutions that facilitate secure and reliable networking. Aimed at offering flexibility, these routers integrate multiple functionalities to enhance operational performance.

One of the main features of the Cisco 1760 router is its modularity. It supports various interface and service modules that allow for customization based on specific networking needs. This modular design enables businesses to expand their networking capabilities over time without necessitating a complete hardware overhaul. The router typically comes equipped with two WAN slots and numerous interface options, including Fast Ethernet and serial interfaces.

The 1760 series routers also support advanced security features, providing businesses with a secure environment for their data transmissions. Built-in firewall capabilities, along with support for Virtual Private Network (VPN) protocols, ensure that sensitive information remains protected. Furthermore, the integration of IPsec and MPLS security features assists organizations in maintaining secure and scalable connections across diverse networks.

Another characteristic of the Cisco 1760 is its support for various technologies, including Quality of Service (QoS). QoS functionality allows network administrators to prioritize traffic, ensuring that critical applications receive the bandwidth they require while minimizing latency. This ability is particularly valuable in environments where voice, video, and essential data applications compete for resources.

The router’s ease of management is also noteworthy. With Cisco’s IOS (Internetwork Operating System), the 1760 provides a user-friendly interface allowing for straightforward configuration and monitoring. The simplicity in managing the network devices helps reduce the burden on IT personnel and enhances overall operational efficiency.

Further enhancing the router’s capabilities is its support for voice over IP (VoIP) applications, making it an ideal choice for organizations looking to implement modern telephony solutions. The ability to support multiple voice channels while maintaining adequate data throughput positions the 1760 as an attractive option for businesses transitioning to unified communications.

In summary, the Cisco Systems 1760 series routers exhibit a harmonious blend of modularity, robust security, traffic management, and VoIP support. They effectively meet the demands of modern networking environments, making them a reliable choice for organizations aiming to streamline operations while ensuring secure connectivity. With their adaptable design, these routers can serve as a powerful backbone for enterprise networking needs.