Cisco Systems 1700 manual Description

		Key Features
Table 1-1	Key Features
Feature		Description
One FastEthernet (10/100BaseTX) port		• Operates in full- or half-duplex mode (with manual override
		available).
		• Supports autosensing for 10- or 100-Mbps operation.
Two Cisco WAN interface card slots		• Supports a combination of any two of the following WAN interface
		cards: ISDN BRI, 56-kbps DSU/CSU, FT1/T1 DSU/CSU, high-speed
		serial, and dual-serial.
		• The WAN interface configuration can be changed as your network
		requirements change.
Console port		Supports router configuration and management with a
		directly-connected terminal or PC. Supports up to 115.2 kbps.
Auxiliary port		Supports modem connection to the router, which can be configured and
		managed from a remote location. Supports up to 115.2 kbps.
SNMP support		Router can be managed over a network using Simple Network
		Management Protocol (SNMP).
AutoInstall support		Configuration files can be easily downloaded to the router over a WAN
		connection.
Kensington security slot		Router can be secured to a desktop or other surface using Kensington
		lockdown equipment.
Cisco ConfigMaker support		You can set up networks that include the Cisco 1700 router using the
		Cisco ConfigMaker application, a wizards-based software tool that helps
		you easily configure and address Cisco routers, access servers, hubs,
		switches, and networks.
Compatible with Cisco Networked		Can be stacked and operated with other members of the
Office stack		Cisco Networked Office stack product line.
Support for Cisco IOS software features		Supports IP, IPX, AppleTalk, IBM, Open Shortest Path First (OSPF),
		NetWare Link Services Protocol (NLSP), Resource Reservation Protocol
		(RSVP), encryption, network address translation, and the Cisco IOS
		Firewall Feature Set.

Cisco 1700 Router Overview 1-3