Step 5 Configure the settings using the following sections as a guide.
•Host Name—The host name (or system name) is a name for the access point that identifies it on your network. The system name appears in the titles of the management system pages.
•Configuration Server Protocol—This setting specifies how the access point obtains an IP address.
–DHCP—IP address is automatically assigned by the network DHCP server.
–Static IP—The access point uses a static IP address that you enter in the IP address field.
•IP Address—This setting assigns or changes the access point IP address. If DHCP is enabled, the access point obtains its IP address from your network DHCP server. You can assign a static IP address in this field.
•IP Subnet Mask—The IP subnet mask identifies the subnet on which the access point resides. This subnet is provided by your network administrator. If DHCP is enabled, leave this field blank.
11