Emulex 370 manual Model

SPECIFICATIONS

STANDARDS

Fibre Channel Protocols:

FC-AL, FC-AL2, FC-PH, FC-PH2, FC-PH3, FC-PI,

FC-PLDA, FCP

Interoperability:

connects to any FC_AL compliant device and any vendors fabric via FL_Port

ARCHITECTURE

Fibre Channel Ports: 20

Physical Interface:

hot–pluggable industry–standard optical SFP transceivers at all ports

Scalability:

up to 8 switches and 126 devices

1Trunking:

automatic trunking fully multiplies inter–switch bandwidth with failover pathing and device prioritization

Zoning:

one–step zoning is port– or ALPA–based overlapping and port–based non–overlapping

Stability:

Stealth Intelligent Change Manager automatically eliminates state and configuration change notification disruptions— zone and port–based management

Integration:

Emulex InSpeed SOC 320 with integrated SERDES

Redundancy:

resident backup firmware copy

PERFORMANCE

Port Speed:

2.125 or 1.0625 Gb/s bi–directional (400MBps per port, full duplex)

Switch Latency:

less than 1µSec with no contention, cut–through routing at 2Gb/s

Performance:

full wire–speed switching

Aggregate Bandwidth: 80Gb/s

Switch Core:

non–blocking Crossbar switch core dynamically delivers multiple concurrent port–port connections

1Fairness & Prioritization:

ensures all devices have guaranteed access to all other devices, or explicitly have prioritized access

PHYSICAL ATTRIBUTES

Dimensions:

17”w x 1.71”h x 18.27”d (43.2cm x 4.3cm x 46.4cm) half–rack width, 1U height

Weight:

18 lbs (8.2 kg)

Mounting:

rack mount or tabletop

MANAGEMENT

Standard Management Software:

Intuitive Integrated Management Web Server with Smart Settings

Access:

TELNET, http Web Server, SNMP MIB

Physical Interface:

10BaseT Ethernet (RJ-45), RS-232 serial port

DIAGNOSTICS

Continuous Diagnostic Operations:

power on self test, port test before insertion, traf- fic & utilization monitoring, continuous link health monitoring, clock delta monitoring, pinpoint detection of drive problems, trend monitoring of device behavior, preventative action before failure, automatic bypass for rogue and unused ports

Diagnostic Troubleshooting Tools:

CRC error monitoring & counting, ordered set detectors, counters on every port, ordered set capture, ordered set transmit

POWER REQUIREMENTS

dual hot–swappable, load–sharing,

universal auto–sensing power supplies and fans

Nominal:

100-250 VAC, 50/60 Hz, 1.0-1.5 amps

ENVIRONMENTAL CONDITIONS

Operating Temperature: 0° to 40° C

Storage Temperature: -40° to 80° C

Humidity: 5-95% non–condensing

Operating Altitude: up to 15,000 feet

Storage Altitude: up to 35,000 feet

Operating Shock: 5g, 11ms 1/2 sine

Storage Shock: 30g, 11ms 1/2 sine

Operating Sine Vibration: 1g, 5-500 Hz

Operating Random Vibration: ISTA 2A

InSpeed™

Model 370

Embedded Storage Switch

2AGENCY APPROVALS

United States:

Safety: NRTL, EMC: FCC Class A

Canada:

Safety: NRTL, EMC: ICES-003 Class A

Europe:

Safety: EN60950, EMC: EN55022, EN55024, CE

Japan:

Safety: IEC60950, EMC: VCCI Class A

Australia:

Safety: AS/NZS 3260, EMC: AS/NZS 3548, Class A

International:

Safety: IEC60950, EMC: CISPR22, CISPR24

OPTIONS & ACCESSORIES

The base model 370 ships with a US power cord, serial cable and Quick Install Card. The Users Guide is available for download through a weblink within the embedded web management interface.

Rack mount kit and SFP transceivers are sold separately.

1Patent pending

2All agency approvals given with optical SFPs only

04-197 1/04

This document refers to various companies and products by their trade names. In most, if not all cases, their respective companies claim these designations as trademarks or registered trademarks. This information is provided for reference only. Although this information is believed to be accurate and reliable at the time of publication, Emulex assumes no responsibility for errors or omissions. Emulex reserves the right to make changes or corrections without notice.

www.emulex.com

Corporate HQ 3535 Harbor Blvd Costa Mesa CA 92626 714 662.5600 Wokingham U.K. (44) 118 977 2929 Paris France (33) 41 91 19 90