Dynex manual Dynex DX-ESW5 and DX-ESW8 Ethernet Switches, Introduction

Page 2

DX-ESW5-ESW8.fm Page 2 Friday, April 29, 2005 4:25 PM

2

Dynex DX-ESW5 and DX-ESW8 Ethernet Switches

Dynex DX-ESW5 and DX-ESW8 Ethernet Switches

Français

......................................................... 6

Español

....................................................... 10

10/100 Mb Fast Ethernet switch

Package contents

Your box should contain the following items:

One DX-ESW5 or DX-ESW8 switch

One AC power adapter

This guide

Wall mounting screws

If your box is missing any of the listed contents, contact Dynex for help at (800) 305-2204.

Introduction

This switch is a low-cost, easy-to-use, high-performance, standard switch to upgrade your old 10 Mbps network to a 100 Mbps network. It boosts your net- work performance up to full duplex data transfer, and it can forward packets as fast as the packets are delivered to the switch. Each port can be used as a general port or as an uplink port for another switch, and will automatically switch its con- figuration appropriately.

Features

Complies with IEEE 802.3 and IEEE 802.3u standards.

5 (DX-ESW5) or 8 (DX-ESW8) 10/100 Mbps auto-negotiating RJ-45 ports supporting Auto MDI/MDIX.

Supports IEEE 802.3x flow control for full-duplex mode and backpressure for half-duplex mode.

Supports MAC address auto-learning and auto-aging.

LED indicators for monitoring power, link, and activity.

Plastic case.

External AC power adapter.

Image 2
Contents DX-ESW5 DX-ESW8 Introduction Dynex DX-ESW5 and DX-ESW8 Ethernet Switches10/100 Mb Fast Ethernet switch Package contents Don’t place heavy objects on the switch Setting up the switchIdentifying switch components Connect your network cables to the switchSpecifications Problem Solution Contact informationCommutateurs Ethernet DX-ESW5 et DX-ESW8 de Dynex 10/100 Commutateur Ethernet rapide Mb Contenu de l’emballageIdentification des composants du commutateur Configuration du commutateurPour configurer le commutateur Ne pas poser dobjets lourds sur le commutateurTransmission différée CaractéristiquesEn étoile 10Base-T 14 880 pps/portInformation sur les contacts Problème SolutionDépannage 32 à 104 F 0 à 40 CIntroducción Interruptores Ethernet DX-ESW5 y DX-ESW8 de Dynex10/100 Mb, interruptor Ethernet Rápido Contenido de la caja No coloque objetos pesados sobre el interruptor Instalación del interruptorIdentificación de los componentes del interruptor Conecte los cables de la red al interruptor100Base-TX Cable UTP categoría 5, 5e máximo 100 m EspecificacionesEstrella Alimentación de CAInformación de contacto Solución de problemasProblema 32 a 104 F 0 a 40CDX-ESW5-ESW8.fm Page 14 Friday, April 29, 2005 425 PM