Dynex DX-WGNBC, DX-WGDTC manual Troubleshooting, Profile Setting tab, About tab, Windows

Page 6

DX-WGNBC_WGDTC_combo.fm Page 6 Wednesday, June 21, 2006 11:53 PM

6

9Click Next. The following screen opens.

The purpose of this screen is to configure the TCP/IP setting of each wireless connection. You must define if the current profile’s IP setting is assigned by a DHCP server or assigned by a fixed IP that is determinate by the Network Administrator.

10Set the values of the following fields:

•DHCP Status—Select Enable if the TCP/IP information is assigned by a DHCP Server. Select Disable if you would like to specify the IP address manually.

•IP Address—Enter the IP address for the network card.

•Subnet Mask—Enter the subnet mask for the network card. The default is 255.255.255.0

•Default Gateway—Enter your network’s default gateway’s IP address.

•DNS Server—Enter the domain name system server’s address.

11Click Complete. You are finished.

Profile Setting tab

The Profile Setting tab lets you create profiles for different network environments.

On this tab, you can click the following buttons:

•Add to create new profile.

•Edit to edit the currently highlighted profile.

•Delete to delete the currently highlighted profile.

•Connect to connect to a network using the currently highlighted profile.

Troubleshooting

About tab

The About tab shows the product version including details of the driver, application, and firmware versions. You must use this version number when reporting problems to Dynex.

Troubleshooting

Windows 98

To make sure that the WLAN 802.11g device is installed properly:

1Click Start, Settings, Control Panel, then Network. Click the Configuration tab. If you find the WLAN 802.11g card listed, it means the card is installed properly. If you see a yellow question mark, it means there is a resource conflict.

-OR-

Right-click on the My Computer desktop icon, then select Properties. Click Device Manager, then click on Network Adapter. If you find the WLAN 802.11g card listed, it means the card is installed properly. If you see a yellow question mark, it means there is a resource conflict.

2Click on the card and then on the card service. You will see the status of the card. If there is a yellow sign either on the card, check the following:

•Check to see if your computer has a free IRQ. Free an IRQ by assigning the same IRQ to some devices. For example COM 1 and COM 2 can be assigned the same IRQ values.

•Make sure that you have inserted the correct card and have installed the correct driver.

Windows 2000

To make sure that the WLAN 802.11g device is installed properly:

1Use Windows 2000 Diagnostics to see if there is any conflict in the resource allocation of the I/O Address or IRQ allocations. If you find that the IRQ or I/O Addresses are already assigned to other devices, you must change that value. The I/O Address must be 40h bytes long.

2Go to the Control Panel. Double-click on the card and view the WLAN card. Double-clicking on the card shows you the card information, driver name, and the driver file. If you do not find the names, there are some problems and the driver is not installed correctly. Reinstall the driver.

3Check the PnP BIOS setup menu, then click No.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents DX-WGNBC & DX-WGDTC Contents Installing the software and hardwareIntroduction Uninstalling the software and hardware Installing the software and hardwareRemove the card Restart your computer Configuring the wireless network Link Information tabAvailable Networks tab Connecting to a network Encryption-Use the default encryptionTo connect to a network Troubleshooting TroubleshootingProfile Setting tab About tabIC statement for DX-WGDTC Legal noticesFederal Communication Commission Interference Statement Important Note IC Radiation Exposure StatementTable des matières Installation des logiciels et du matérielTable des matières Un guide de l’utilisateur format papierInstallation des logiciels et du matériel Onglet Link Information Information de liaison Configuration du réseau sans filConfiguration du réseau sans fil Retirer l’adaptateur Redémarrer lordinateurConnexion à un réseau Onglet Available Networks Réseaux disponiblesUtilisant le même Ssid Pour le raccordement à un point d’accèsCliquer sur Next Suivant. L’écran suivant s’affiche 10 Régler les valeurs des champs suivantsOnglet de paramétrage du profil Profile Problèmes et solutionsProblèmes et solutions Onglet About À propos deRemarque importante pour le modèle DX-WGDTC Avis juridiquesRemarque importante pour le modèle DX-WGNBC Déclaration d’IC pour le modèle DX-WGDTCInstalación del software y el hardware ContenidoIntroducción ContenidoInstalación del software y el hardware Repita los pasos 10 al 12 para agregar el protocolo IPX/SPXDesinstalar el software y el hardware Configuración de la red inalámbricaConfiguración de la red inalámbrica La ficha Link Information Información del EnlaceConexión a una red Ficha Available Networks Redes DisponiblesQue use el mismo Ssid Para conectarse a una redFicha de Ajustes de Perfil Ajuste los valores de los siguientes camposHaga clic en Complete Completar. Ha terminado Localización y Corrección de Fallas Ficha About Acerca deLocalización y Corrección de Fallas Declaración del IC para DX-WGDTC Avisos legalesAvisos legales Declaración del IC para DX-WGNBCAvisos legales Avisos legales
Top Page Image Contents