D-Link DP-311u manual Technical Specifications, Printer Connection

Page 70

Technical Specifications

Printer Connection

Printer Port: USB port (ver 1.1)

Bidirectional Communication: Hewlett-Packard PJL (Printer Job Language) standard for bidirectional communication.

Network Connection

Network Standards: IEEE 802.3 10Base-T Ethernet, IEEE 802.11b Wireless Standard

Network Data Transfer Rate: 10/100 Mbps (megabits per second)

Network Connector: RJ-45 connector for 10Base-T Category 5 twisted-pair connection

Network Protocols

Ethernet Frame Types: 802.2, 802.3, Ethernet II, SNAP (auto-switching)

Transport Protocols: TCP/IP, NetBEUI,AppleTalk/EtherTalk, LPR

TCP/IP Protocols Supported: BOOTP, SNMP, Telnet, TFTP, FTP, LPD, RARP, DHCP

Management and Diagnostics

Standard: SNMP

MIBs: MIB-II (RFC 1213)

Diagnostic LED Indicators: Pw, Lk/Act, USB

Environmental and Physical

Power Supply: External power supply providing 5V/ 2.5A

Dimensions: 3.54" x 3.19" x 1.57" (90mm x 81mm x 40mm)

Weight: approx. 5.19 oz. (147g)

Operating Temperature: 32 to122°F (0 to 50°C)

Storage Temperature: -13 to 131°F (-25 to 55°C)

Humidity: 5% to 95% non-condensing

Emissions: FCC Class B, CE Class B, VCCI Class B

70

Image 70

Contents Link DP-311U Contents Package Contents Introduction NetBEUI AppleTalkPower Power / USBLED Indicators Ethernet/WLANAntenna Power Reset Network Cable ConnectorDC Power Connector RJ-45Wireless Basics Installation Considerations Standards-Based TechnologySetting up the DP-311U Power on Self-Test Faulty ComponentGetting Started Using the Web Configuration Home Configuration Page Network Network Tools Help TCP/IP Printing for Windows XP Select your Connection Mode TCP/IP Printing for Windows XPTCP/IP Printing for Windows XP Go to Start Settings Printers and Faxes Add a Printer Select Local Printer Standard TCP/IP PortSelect Custom Click Next Click Finish TCP/IP Printing for Windows XP TCP/IP Printing for Windows TCP/IP Printing for Windows TCP/IP Printing for Windows Go to Start Settings Printers Printer iconHighlight Standard TCP/IP Port Select Custom Click Next Click Finish TCP/IP Printing for Windows Select Do not share this printer TCP/IPPrinting For Windows 98SE/Me TCP/IP Printing for Windows 98SE/Me TCP/IP Printing for Windows 98SE/Me Go to Start Settings Control Panel Select the letter Representing TCP/IP Printing Click Properties Click Add Port Windows will ask for a restart Click Yes Start Settings Printers Add Printer Click Next Select Yes to print a test Click Finish Unix/Linux Printing Preferences Setting up Apple Talk or LPR Printing in Mac OSNetwork Setting up Apple Talk or LPR Printing AppleTalk ActiveClick Add Printer Click Print to print your document LPR Printers using IP protocol Setting up Apple Talk Printing Mac OSPrinting from MacOS Client Workstations Printing from MacOS Client Workstations Select PPDUsing the Network Setup Wizard in Windows XP Networking BasicsNetworking Basics Enter a Computer description and a Networking Basics Format the disk if you wish, and Click Next Networking Basics Ready to use How to assign a Name to your computer How to find your IP Address in Windows XP Computer nameSupport tab Control PanelConnections Network ConnectionsProperties Assigning a Static IPAddress Windows XP/2000 „ Click Internet Protocol TCP/IP „ Click PropertiesTechnical Specifications Printer ConnectionTechnical Support Warranty and Registration Page 03/17/03 DP-311U Printer Compatibility List For Windows Appendix DP-311UPrinterCompatibilityList for Windows

Related manuals

Manual 76 pages 58.67 Kb