Connecting The DP-300U To Your Network

Connecting The DP-300U To Your Network

First, insert one end of a straight-through CAT5 Ethernet RJ-45 cable into the “Network Port” (shown below.) Connect the other end of the cable to the LAN port of the gateway or switch. Note: Do not connect the power cord to the DP-300U until you are advised to do so

The USB Port is designed only for direct connection to USB Printer. No other USB devices will be recognized.

Next, make sure that the Printer is turned OFF.

Using the USB cable or printer cable, connect one end of the cable to the USB or parallel port of the DP-300U (shown below) and the other end to the USB or parallel port of the printer.

Turn ON the printer.

Power Plug Parrallel Port 1 Parrallel Port 2 USB Port Network Port

Then, plug one end of the power adapter into the DP-300U and the other end into your electric outlet.

The DP-300U will turn on and begin a self-test.

For Mac OS printing, please refer to users manual located on CD-ROM.