Cabletron Systems 250 quick start Hardware Installation

Page 8

HARDWARE INSTALLATION

♦Instructions to Install the SmartSwitch™ Router 250 Hardware:

1.Ensure that the Power Switch on the router is OFF. Connect the router to the AC power source using the power cable.

2.Connect the router to the computer workstation’s Ethernet card using the crossover cable labeled "Ethernet 10Base-T, Crossover" (RJ-45 connector). If you are connecting to a hub, use a standard 10Base-T straight-through cable (not provided).

3.Connect the router to the ADSL line using the cable labeled "ADSL or ISDN" (connect the RJ-45 connector to the router’s ADSL R-DMT port and the other end of the cable to the Telephone Jack).

4.Switch the router Power Switch ON.

7

Image 8

Contents Quick Start Guide Contents Page Cabletron Quick Start SmartSwitch RouterIntroduction This Guide Information to collect from your Network Service Provider Which link protocol should you use?Contents of the Box Hardware Installation Instructions to Install the SmartSwitch Router 250 HardwareSmartSwitch Router 250 Installation Diagram This section assumes that you have already Accessing Quick StartConfigure your Windows 95 PC for TCP/IP Instructions Install Cabletron DSL Tools on your PC Access Quick Start Windows 95, Windows 98, Windows NTInstructions Router Configuration Configuration InstructionsNetwork Options Link ProtocolRFC 1483MER MAC Encapsulated Routing Internet Account PPP onlyDNS Information Select Router to Configure Change your LAN IP SettingsChange your WAN IP Settings OptionsTools Choose a PVCSnmp Options Terminal WindowBackup/Upgrade Reboot from NetworkExit Quick Start Execute ScriptRestart your PC If you need additional help or informationPage Adapter Setup Protocol SetupPage SmartSwitch Router 250 Hardware Specifications Appendix B. Hardware ReferencePower OperatingEnvironment RequirementsFront Panel LED StatesRear Panel 10BASE-TConnections Ethernet LAN ConnectionADSL-DMT WAN Connection Console ConnectionADSL-DMT Port Ethernet 10Base-T Port Pin Signal NamePort Descriptions Console Port Pin Signal Name Appendix C. Federal Communications Commission FCC Part 15 Class B StatementInstructions for Trained Service Personnel Only Canadian D.O.C. NoticeContacting Cabletron Technical Support Web Site MailFax Address