Cabletron Systems 9G429-02, 9G421-02 appendix Exiting the General Configuration Screen

Page 8

9G421-02/9G429-02 Module Specific Information

Default Interface

Contains the number that represents the interface that is connected to the module’s Default Gateway. In some instances, dissimilar modules have different corresponding interface numbers. For example, if you are assigning a default interface to a 9E133-36 module and you enter a 3, then the default interface is the Flexible Network Bus. However, if you are assigning a default interface to a 9F310-02 module and you enter a 3, then the default interface is the Internal Network Bus. See Table 1 for module-specific interface information. The default is NONE DEFINED, meaning no default interface selected.

NOTE

The Default Interface field becomes active after you enter an IP address in the Default Gateway field.

Base MAC Address

Displays the MAC Address of the selected module. This is the MAC Address of the SMB-10 interface.

TFTP Gateway IP

The IP address of the router that connects to or is closest to the module. Configure this address when you are performing TFTP downloads in a routed environment (if proxy ARP is disabled on the router).

Exiting the General Configuration Screen

To exit the General Configuration Screen, use the arrow keys to highlight RETURN, then press the Return key.

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents SmartSwitch 9G421-02/9G429-02 Local Management Appendix Page Introduction Modifying Fields and User PrivilegesModule Interface Codes Interface Number Name DescriptionGeneral Configuration Screen General Configuration ScreenGeneral Configuration Screen Fields Screen Lockout Time Exiting the General Configuration Screen Port Statistics Screen Port Statistics ScreenPort Statistics Screen Fields Enable or disable ports from the Bridge Configuration Screen Displaying Statistics for Another Port Exiting the Port Statistics Screen
Top Page Image Contents