9E312/9E423 Module Bridging
You can also open the Port Source Addresses window from the Module View by clicking
TIP on the front panel interface of interest and selecting the Source Addressing option from the menu that appears.
The Port Source Addresses window displays the MAC addresses of all devices that have transmitted packets that have been forwarded through the selected bridging interface during the last cycle of the Filtering Database’s defined ageing timer (learned addresses that have not transmitted a packet during one complete cycle of the ageing timer are purged from the Source Address Table). For more information on the Filtering Database, see Filtering Database on page
NOTE |
The ageing time displayed in the Port Source Addresses window is the same as the ageing time displayed in the Filtering Database window. The ageing time can be set from either window, and any changes to its value will be reflected in both locations.
Setting the Ageing Time
The Filtering Database Ageing Time is
To alter the Ageing Time for Dynamic and Learned entries:
1.Click the 
)next to the Device Ageing Time field. The Device Ageing Time window, Figure
Figure 3-8. Device Ageing Time Window
2.Type in the new Ageing Time (allowable range is 10 to 1,000,000 seconds; the default is 300 seconds).
3.Click 
to accept the new Ageing Time, or click 
to exit the window without making changes.
Filtering Database |