Introduction, Package Contents | Avenview SW-HDSDI-8X1 guide

1.3Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.

1.4Introduction

Avenview SW-HDSDI-8X1, 8 Port HD/SD-SDI Switch receives, equalizes 8 SDI inputs, perfectly switches the

desired input to SDI equipped monitors or receivers. The switch supports both HD/SD-SDI bit rates, and the

re-transmits video signal without degradation. Through RS-232, IR remote, or front panel push button, the

control of the SDI switch becomes versatile and easier. SW-HDSDI-8X1 offers the most convenient and cost

effective means for swift switch and duplication of high quality SDI in the market.

-HD/SD-SDI Switch

-8 equalized SDI inputs

-Dual color LED indication of HD/SD of the output SDI

-Automatic detection of the SDI input

-SYNC IN/OUT

-Low cost 8X1 HD/SD (dual rate) Switch with Dual Outputs (Splitter)

-Provides the equalized transmission path up to 300m (1000 feet) for HD cases

-Multiple control by RS232, IR remote, and push button

1.5Package Contents

Before you start the installation of the converter, please check the package contents.

-	SW-HDSDI-8X1	x 1
-	Power Adapter (+5VDC)	x1
-	IR Remote Control	x1
-	User’s Manual	x1

www.avenview.com	4