Installation, Unpack and Inspect | D-Link DGE-530T guide

DGE-530T Gigabit Ethernet Adapter Card

Installation

Unpack and Inspect

CAUTION: Under ordinary circumstances, a DGE-530T card will not be affected by a static charge that may be received through your body during handling of the unit. In special circumstances, the user may carry an extraordinarily high static charge and it is good practice to reduce the charge by touching a ground before handling the adapter card.

Open the shipping carton and carefully remove all items. Ensure that the following items are included:

•One DGE-530T Gigabit Ethernet Adapter Card

•DGE-530T Drivers and Manual on CD-ROM

•One Quick Installation Guide

If any of these items are missing or damaged, please contact your local reseller for replacement.

Installing the Adapter

1. Shut down the computer, unplug its power cord, and remove the chassis cover.

(Important: Opening the case of your computer may compromise the warranty of your computer. Consult the computer manufacturer before opening the case to ensure that you adhere to warranty guidelines. In some cases, you may need to have the DGE-530T installed by your computer manufacturer.)

2.Insert the contact edge of the DGE-530T card into the connector of any available PCI Bus Master expansion slot. Press the card firmly into the connector such that the card’s contacts are fully seated in the connector.

3.Install the bracket screw that secures the card to the computer chassis.

4.Replace the computer’s chassis cover.

5.Reconnect the computer’s power cord, and switch computer power on. If the BIOS section of your computer’s boot program is Plug-and-Play compliant, then at power-up the BIOS will automatically configure any newly installed DGE-530T adapter.

NOTE: Due to a fault in some Plug-and-Play BIOS programs, occasionally a newly installed adapter is assigned an Interrupt Number which has already been assigned to another device. In such a case, the conflict of the Interrupt Number will cause faults in the behavior of both devices. Therefore, the user must run the CMOS Setup utility, and manually assign a non-conflicting Interrupt Number.

Connecting the Network Cable

1000BASE-T Gigabit Ethernet enables operation over the extensive installed base of legacy Category 5 cabling systems and, by default, the Category 5 cabling systems currently being installed.

It provides optimal full-duplex 1000Mb/s Ethernet service over Category 5e links as defined by ANSI/TIA/EIA-568-A-5. Topology rules for 1000BASE-T are the same as those used for 100BASE-T. Category 5 and 5e link lengths are limited to 100 meters.

DGE-530T specifications

The D-Link DGE-530T is a high-performance PCI Gigabit Ethernet adapter designed to provide reliable and high-speed network connectivity for both home and office environments. Known for its robust functionality, this adapter supports 10/100/1000 Mbps transfer rates, allowing users to experience seamless data transmission, making it an ideal choice for bandwidth-intensive applications such as video streaming, online gaming, and large file transfers.

One of the standout features of the DGE-530T is its auto-negotiation capability, which enables the adapter to automatically adjust its transfer speed to match the network's capabilities. This ensures optimal performance across various network configurations, whether users are connected to older 10/100 Mbps equipment or the latest Gigabit networks. The adapter comes equipped with a PCI 2.2 interface, allowing it to be installed into virtually any desktop computer or server with a compatible slot, providing versatile compatibility.

The DGE-530T utilizes a powerful chipset that enhances overall network stability and performance. It supports full-duplex operation, enabling simultaneous data transmission in both directions, which significantly increases throughput. Coupled with features such as support for Wake-on-LAN (WoL), users can remotely power on their computers, making the adapter a convenient option for remote management and maintenance tasks.

Security is another important aspect of the DGE-530T. It supports IEEE 802.1Q Virtual LAN (VLAN) tagging, which helps enhance network security and improve traffic management by allowing multiple virtual networks over a single physical connection. This feature is particularly beneficial in enterprise environments where data segmentation and security are critical.

In terms of ease of use, the DGE-530T comes with a user-friendly installation process, complete with drivers supporting various operating systems, including Windows and Linux. D-Link offers comprehensive technical support and documentation, facilitating a smooth setup experience for users.

Overall, the D-Link DGE-530T is an excellent choice for those looking to upgrade their network's capacity and performance. With its combination of high-speed connectivity, advanced features, and compatibility, this PCI Gigabit Ethernet adapter is designed to meet the demands of modern networking environments. Whether in a small office or a home setting, the DGE-530T provides reliable performance and functionality that is crucial for today’s connectivity needs.