Brocade Communications Systems 6910 Basic Configuration and Management, Software Image, Reload

Page 35

 

Chapter

Basic Configuration and Management

5

 

 

 

 

Software Image

This chapter describes objects to manage the software image and configuration in a device. Refer to the configuration guide for detailed explanation on the features discussed in this chapter.

“Reload” on page 23

“File download and upload” on page 24

“Software image details” on page 26

Reload

The following object allows you to reload the agent.

Name, Identifier, and Syntax

Access

Description

 

 

 

snAgReload

Read-write

Reboots the agent.

brcdIp.1.1.2.1.1

 

The following values can only be read:

Syntax: Integer

 

other(1) – Agent is in unknown or other state

 

 

running(2) – agent running

 

 

busy(4) – reload not allowed at this time, flash is busy

 

 

The following value can be written:

 

 

reset(3) – Do a hard reset

 

 

The agent will return a response before the action occurs.

 

 

 

snAgEraseNVRAM

Read-write

The following values can only be read:

brcdIp.1.1.2.1.2

 

normal(1)

Syntax: Integer

 

error(2) – Operation failed or the flash is bad

 

 

erasing(4) – agent is erasing NVRAM flash

 

 

busy(5) – operation not allowed at this time, flash is busy.

 

 

The following value can be written:

 

 

erase(3) – NVRAM is set to be erased.

The agent will return a response even before the erase is done.And the value of this object will be erasing(4) until the erase is done. And the erase request will be rejected until the value of this object is either normal(1) or error(2).

Brocade 6910 Ethernet Access Switch MIB Reference

23

53-1002582-01

 

Image 35
Contents Brocade 6910 Ethernet Access Switch Brocade Communications Systems, Incorporated Document History Brocade 6910 Ethernet Access Switch MIB Reference Contents Chapter Registration Physical Properties of a Device Chapter MAC-Based Vlan MIB Variable Index Supported hardware and software About This DocumentThis chapter Text formatting Document conventionsRelated publications Getting technical help Document feedback Page Downloading the MIB from Technical Support web site Obtaining and installing the Brocade 6910 MIBsOverview of the Brocade 6910 MIB IntroductionReloading MIBs into a third-party NMS Standard objectsProprietary objects Object Group Name Object Identifier Sections to Refer To Structure of this guide Structure of this guideSNMPv3 support RFC compliance management Supported on Brocade 6910 switchesSupported Standard MIBs Ieee standards Lldp MIB supportPartially supported standards RFC 1611 DNS Server MIB extensions Following groups are supported on Brocade 6910 switchesRFC 1213 Management Information Base MIB-II RFC 1493 Definitions of managed objects for bridgesRFC 1612 DNS Resolver MIB Extensions Following groups are supported on Brocade 6910 switches RFC 2576 Snmp Community MIB RFC 2096 IP forwarding table MIBRFC 2737 Entity MIB, Version RFC 2737 Entity MIB, VersionRFC 2925 Ping MIB RFC 2863 Interfaces Group MIBRFC 2925 Remote Trace MIB RFC 3636 Ieee 802.3 Medium Attachment Units MAU MIB RFC 3413 Snmp Notification MIBRFC 3635 Ethernet-like interface types Ieee 802.1ag Connectivity Fault Management CFM MIB RFC 4878 OAM Functions on Ethernet-Like Interfaces MIB Dot3OamDyingGaspEnable Dot3OamEventLogTable RFC 4878 OAM Functions on Ethernet-Like Interfaces MIB Object Name and Identifier Description RegistrationRegistration Boards Power supplyPhysical Properties of a Device Common objectsCommon objects Power supply tableTemperature General chassisFollowing object allows you to reload the agent Basic Configuration and ManagementSoftware Image ReloadSoftware Image File download and uploadSoftware Image Software image details Syntax DisplayString It can display up to 32 characters Sntp server table Software configurationSwitch IP configurations Software configurationMedia table Media table General security objects User AccessAgent user access group Radius general group Authorization and accountingAuthorization and accounting Following objects provide information on the Radius server Radius server tableRadius server table Tacacs general objects Tacacs general objectsFollowing objects provide information on the Tacacs server Tacacs server tableTacacs server table Tacacs server table Clear interface multi-device port authentication objects Multi-Device Port AuthenticationMulti-device port authentication Global multi-device port authentication objectsMulti-device port authentication Multi-device port authentication objectsMulti-device port authentication clear sessions Multi-device port authentication Multi-device port authentication Traffic Security Dynamic ARP Inspection Vlan configuration tableDAI Vlan configuration table Dynamic Host Configuration Protocol Dynamic Host Configuration ProtocolDynamic ARP Inspection Interface configuration table Dhcp Snooping global scalar object Dhcp Snooping Vlan configuration tableDhcp Snooping Interface configuration table IP Source Guard IP Source Guard Interface configuration tableIP Source Guard MAC-based Vlan global objects MAC-Based VlanMAC-based Vlan global objects Interfaces Switch port informationSwitch port information group Switch port information Link Aggregation Group LAG table Link Aggregation Group LAG tableFdryLinkAggregationGroupTable Link Aggregation Group LAG table System Dram information group Monitoring and LoggingCPU utilization Following are the MIB objects display statistics for ARP Global ARP statisticsSupport for optical monitoring Global ARP statisticsSystem logging System loggingSystem log server table System logging Object for Stacking Agent temperature table for stackingAgent temperature table for stacking Trap receiver table Traps and Objects to Enable TrapsObjects for Brocade 6910 switch traps Trap informationBrocade supports the following traps from RFC Standard trapsSystem status traps Standard trapsBrocade supports for the following traps for Rmon from RFC Traps for spanning tree protocolTraps for Rmon events IronWare traps IronWare trapsGeneral traps Brocade supports for the following traps for stacking Port security trapsTraps for stacking Examples ExamplesRmon event traps Page Examples MIB Variable Index Brocade 6910 Ethernet Access Switch MIB Reference Page Brocade 6910 Ethernet Access Switch MIB Reference

6910 specifications

Brocade Communications Systems, a leader in networking solutions, has established a strong presence in the data center and enterprise networking space with its various product offerings. One of its noteworthy products is the Brocade 6910 Switch, designed specifically for high-performance network environments.

The Brocade 6910 is a high-density, compact Ethernet switch that operates at speeds up to 10 Gigabits per second. It is engineered to support the increasing data demands of modern enterprises while providing reliability and flexibility. With its compact form factor, the 6910 is suitable for space-constrained environments, making it an ideal choice for data centers and edge deployments.

One of the standout features of the Brocade 6910 is its support for both Layer 2 and Layer 3 networking, allowing for dynamic routing and switching capabilities that enhance overall network performance. This dual functionality enables organizations to optimize their network architecture, ensuring seamless data transfer and management.

Power over Ethernet (PoE) functionality is another significant characteristic of the Brocade 6910. This feature allows the switch to deliver power to connected devices, such as IP phones and wireless access points, eliminating the need for separate power sources and reducing cable clutter. This capability not only streamlines installations but also lowers operational costs.

In terms of scalability, the Brocade 6910 supports an extensive number of physical and virtual interfaces, which makes it versatile enough to grow with the needs of an organization. It can efficiently handle increasing traffic loads, enabling businesses to scale their network infrastructure without extensive upgrades.

The switch also incorporates advanced features like Virtual Chassis technology, allowing multiple switches to operate as a single logical entity. This simplifies management and improves redundancy, enhancing overall network reliability. Additionally, the Brocade 6910 includes comprehensive security features that protect network data through robust monitoring and access controls.

Furthermore, the Brocade 6910 is equipped with intelligent network management tools that provide visibility into network performance and health. This functionality helps IT teams to manage resources effectively, troubleshoot issues, and streamline maintenance tasks.

In conclusion, the Brocade 6910 Switch exemplifies modern networking solutions with its high performance, versatility, and advanced management capabilities. Organizations looking for reliable, scalable, and efficient networking solutions will find the Brocade 6910 to be an outstanding choice that meets the demands of today’s dynamic environments.