Avenview specifications HDMI-C5-SR Transceiver Installation

HDMI-C5-SR Transceiver Installation

a.Monitor Connection: Connect HDMI monitor’s HDMI cable to Transceiver and turn on the monitor.

b.Device Connection: Plug power adapter to HDMI-C5-SR, the “PWR” LED and “M1 LINK” will turn ON. The “LINK IN” LED should turn off since there is no input of video signal from “LINK IN” port.

Connection of HDMI Transceiver

c.HDMI Cascading: The RJ45 “LINK IN” port is designed to receive the HDMI signal from

Transmitter over Cat 5 / 5e / 6 cable. Follow “HDMI-C5-S Single Port Transmitter

Installation” to install Transmitter and extend the HDMI signal.

www.avenview.com 8