EMC CLARiiON manual Verifying the silent installation or removal

Page 90

Silent Installations and Removals

Verifying the silent installation or removal

This section allows you to verify if the silent installation or removal of the Initialization Utility, Host Agent, Server Utility, and CLI were successful.

1.Check the log files InstallShield creates on each server. You specified the name and location of the log files in step 1 of the installations and step 2 of the removals.

2.In the log file, select ResponseResult. If a result code of 0 displays, the installation or removal was successful. If the installation or removal was not successful, one or more of the errors listed in Table A-1 are displayed:

Table A-1Error Codes

Error

 

Value

Description

 

 

 

 

1

General error

 

 

2

Invalid mode

 

 

3

Required data not found in the Setup.iss file

 

There is mismatch between response recorded in the response file and the

 

correct operation. In case of Navisphere Agent installation you might not have

 

specified the optional switches correctly.

 

 

4

Not enough memory available

 

 

5

File does not exist – The response file specified with the -soption

 

might not exist.

 

 

6

Cannot write to the response file

 

 

7

Unable to write to the log file

 

 

8

Invalid path to the InstallShield Silent

 

response file

 

 

9

Not a valid list type (string or number)

 

 

10

Data type is invalid

 

 

11

Unknown error during setup

 

 

12

Dialog boxes are out of order

 

 

A-32

EMC CLARiiON Server Support Products for Windows Installation Guide

Image 90
Contents Installation Guide Copyright 2004 2006 EMC Corporation. All rights reserved Trademark InformationContents Chapter Installing and Using the Admhost and Admsnap Utility Chapter Installing and Using Navisphere CLIAppendix a Silent Installations and Removals Contents Preface Documentation Conventions used in this guide Typographical ConventionsThis typeface Sales and customer service contacts Finding current informationNavisphere Host Agent and CLI Release Notes Preface Xii About the CLARiiON Server Applications About EMC Navisphere software Navisphere Storage System Initialization UtilityNavisphere Host Agent Navisphere Server Utility Admhost Utility Admsnap UtilityCLARiiON VSS Provider Navisphere CLIGuide Page Page Start Run Drive\CXSeries.exe or drive\AXSeries.exeFiles\EMC\Navisphere Storage System Initialization Utility Page Using the Navisphere Storage System Initialization Utility To run the utility from a hostTo run the utility from the CD Overview Navisphere Host AgentNavisphere Server Utility Determining which application to install Function Host Agent Server Utility AX-Series CX-Series Host Agent and Server Utility requirements Installing the Navisphere Host Agent To install the Host AgentDrive\CXSeries.exe Drive\Program Files x86\EMC\Navisphere Agent Navisphere Agent Installer dialog box, click OKSelect Navisphere Host Agent Click Create/Overwrite FileNavisphere Agent Setup dialog box, click Finish Click Use Existing FilePage Installing the Navisphere Host Agent To remove the Host Agent Using the Event Monitor configuration file Starting the Host Agent serviceDrive\Program Files x86\EMC\Navisphere Agent\Navimon.cfg Startup Type, select Automatic Using the Host AgentStarting the Host Agent service Close Computer ManagementStopping the Host Agent service Configuring storage systemsInstalling the Navisphere Server Utility To install the Server UtilityInstalling the Navisphere Server Utility To remove the Server Utility Using the Navisphere Server Utility To run the Server Utility from a hostTo run the Server Utility from the CD Page Admhost Utility Admsnap UtilityCLARiiON VSS Provider Installing the Admhost Utility To install the Admhost Utility on a serverChoose Destination Location dialog box appears Navisphere Admhost Setup page opensSetup Customer Information dialog box appears Select Program Folder dialog box opensUsing the Admhost Utility Admhost lunactivateAdmhost lunlist Installing the Admsnap Utility Installation prerequisitesTo install the Admsnap Utility Navisphere Admsnap Setup page opens Using the Admsnap Utility SnapView Command Line Interfaces Reference GuideTo remove the Admsnap Utility Installing the CLARiiON VSS Provider To install the CLARiiON VSS Provider \Program Files\EMC\CLARiiON VSS Provider\Program Files\EMC\Navisphere CLI Using the CLARiiON VSS Provider To remove the CLARiiON VSS ProviderInstalling and Using the Admhost and Admsnap Utility Installing and Using Navisphere CLI Navisphere CLI requirements Installing Navisphere CLI Select Navisphere CLIUsing Navisphere CLI Navisphere Command Line Interface CLI ReferenceDrive\Program Files x86\EMC\Navisphere CLI Server Utility Initialization UtilityHost Agent Navisphere CLIAbout silent installations or removals CLIInstalling the Navisphere Initialization Utility Preparing for the installationSetup.exe -r-f1fullpath\responsefilename where Creating a response fileF1fullpath\responsefilename Performing a silent installation F2fullpath\logfilenameRemoving the Navisphere Initialization Utility Creating a response fileInitUtilUninstallString -r-f1fullpath\responsefilename InitUtilUninstallStringPerforming a silent removal F2fullpath\logfilename Installing revision 6.16 or later Installing Navisphere Host AgentInstalling revision 6.7 or earlier Click Next in the Navisphere Agent Welcome dialog boxOverride Userid useridCfgfilefullpath and configuration file filename ServerservernamePerforming a silent installation Userid userid Override Installing Navisphere Host Agent Removing the Host Agent Removing revision 6.7 or earlierRemoving revision 6.16 or later Removing the Host Agent HostAgentUninstallString F1full path\responsefilenameHost Agent example Installing the Navisphere Server Utility Setup.exe -r-f1fullpath\responsefilename Performing a silent installation Removing the Navisphere Server Utility ServerUtilUninstallString -r-f1fullpath\responsefilename ServerUtilUninstallStringF2fullpath\logfilename Click Next in the Navisphere CLI Welcome dialog box Creating a response file Performing a silent installation Removing Navisphere CLI CLIUninstallString -r-f1fullpath\responsefilename CLIUninstallStringF2fullpath\logfilename Verifying the silent installation or removal Required data not found in the Setup.iss fileNavicli -h servername or IP address remoteconfig -getconfig Hservername or IP addressSilent Installations and Removals Glossary Glossary Glossary Manager Memory moduleMirroring NavisphereIndependent disks Or secondary route Events Manager Striping disk Storage-systemCaching StripingIndex Index

CLARiiON specifications

EMC CLARiiON is a storied name in the realm of data storage solutions, renowned for its reliability, scalability, and advanced features. As a part of EMC's pioneering approach to enterprise storage, CLARiiON systems are designed to meet the demands of businesses ranging from small enterprises to large data centers.

One of the standout features of EMC CLARiiON is its support for both Fibre Channel and iSCSI protocols, which allows for versatile deployment options in various network environments. This dual-protocol capability is key in enabling organizations to leverage existing network infrastructures while providing the flexibility to scale as needed.

The architecture of CLARiiON is built on a modular design, featuring a series of storage processors, also known as storage controllers. This design not only enhances performance but also allows for easy upgrades and expansions. The use of RAID (Redundant Array of Independent Disks) technology ensures data redundancy and integrity, offering a variety of RAID levels to cater to specific performance and data protection needs.

EMC CLARiiON also integrates advanced data management features such as online capacity expansion, which enables administrators to add drives without disrupting operations. This is complemented by the system's support for thin provisioning, which allows for more efficient use of storage space, presenting only the amount of storage that is actually being used.

One notable technology employed by CLARiiON is the Storage Resource Management (SRM) suite, which provides powerful tools for monitoring, reporting, and managing storage usage and performance. This suite enables IT teams to optimize their storage investments by identifying trends and potential issues before they affect service levels.

Another critical aspect is the inclusion of automatic load balancing features, which help distribute workloads evenly across available storage resources. This promotes optimal performance and reduces the risk of bottlenecks during peak usage times. Additionally, the snapshot technology embedded in CLARiiON offers users the ability to create point-in-time copies of data, facilitating rapid recovery in the event of data loss or corruption.

Lastly, EMC CLARiiON systems are designed with high availability in mind. They often feature redundant components and advanced failover capabilities to ensure seamless operations. With these characteristics, EMC CLARiiON stands as a robust solution for organizations seeking to enhance their data storage strategy, driven by cutting-edge technology and tailored to meet diverse business requirements.