Specifications — IPL T PCS4, IPL T PCS4i
Ethernet control interface
Connectors | 1 |
Data rate | |
Protocols | ARP, DHCP, ICMP (ping), TCP/IP, UDP/IP, Telnet, HTTP, SMTP |
Default settings | Link speed and duplex level = autodetected |
| IP address = 192.168.254.254 |
| Subnet mask = 255.255.0.0 |
| Gateway = 0.0.0.0 |
| DHCP = off |
Web server | Up to 200 simultaneous sessions |
| 960 kB nonvolatile user memory |
Program control | Extron’s Simple Instruction Set (SIS™) |
Global Viewer requirements | Microsoft® Internet Explorer ver. 6 or higher |
AC control interface
Connectors |
|
IPL T PCS4 | 4 USA/Edison power connectors |
IPL T PCS4i | 4 IEC power connectors |
Voltage |
|
IPL T PCS4 | 120 VAC, |
IPL T PCS4i | 220 VAC, |
Minimum AC load |
|
IPL T PCS4 | 20 mA, 2.4 watts at 120 VAC |
IPL T PCS4i | 20 mA, 4.4 watts at 220 VAC |
Maximum AC load, aggregate |
|
IPL T PCS4 | 10 A, 1200 watts at 120 VAC |
IPL T PCS4i | 10 A, 2200 watts at 220 VAC |
Maximum AC load, individual |
|
IPL T PCS4 | 10 A, 1200 watts at 120 VAC |
IPL T PCS4i | 10 A, 2200 watts at 220 VAC |
Current sense |
|
Range | 5 mA to 10 A |
Resolution | 0.1 mA steps from 5 mA to 99.9 mA |
| 1 mA steps from 100 mA to 999 mA |
| 10 mA steps from 1 A to 10 A |
Tolerance | ±20% |
Alarm relay control
Quantity/type | 1 normally open relay |
Connector | (1) 3.5 mm captive screw connector, 2 pole |
Contact rating | 24 V, 1 A |
General
Power input |
|
PL T PCS4 | 120 VAC, 50/60 Hz, 15 watts, internal |
IPL T PCS4i | 220 VAC, 50/60 Hz, 15 watts, internal |
Temperature/humidity | Storage: |
| Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
Rack mount | Yes, with optional 1U 9.5" deep rack shelf kit, part |
| Also |
Enclosure type | Metal |
Enclosure dimensions | 1.7" H x 8.7" W x 9.5" D (1U high, half rack wide) |
| 4.3 cm H x 22.0 cm W x 24.1 cm D |
| (Depth excludes connectors.) |