Extron electronic IPL T SFI244 manual Specifications, Model Part Numbers, Optional Accessories

SPECIFICATIONS

SERIAL CONTROL INTERFACE

Port number/type
IPL T SF24	2	RS-232/RS-422/RS-485
	configurable serial
IPL T SFI244	2	RS-232 only
Connectors
IPL T SF24	(2) 9-pin male D and (1) 3.5 mm
	5-pole captive screw connector
IPL T SFI244	(1) 3.5 mm 5-pole captive screw
	connector
Baud rate and protocol	300 to 115200 baud
	Default settings (adjustable): 9600,
	8-bit, 1 stop bit, no parity
Pin configurations
Serial, 9-pin D
RS-232 (default)	2	= RX, 3 = TX, 5 = GND, 7 = RTS,
	8	= CTS
RS-422	2	= RX-, 3 = TX-, 5 = GND,
	7	= TX+, 8 = RX+
RS-485	2&3 = data- and tie 2&3,
	5 = GND, 7&8 = data+ and tie 7&8
Serial, 5-pole captive screw....	COM1: pin 1 = TX, 2 = RX, 3 = GND
	COM2: pin 4 = TX, 5 = RX, 3 = GND
Program control	Extron’s Simple Instruction
	Set™ – SIS™
Global Viewer requirements	Microsoft® Internet Explorer ver. 6
	or higher or Netscape® Navigator
	ver. 7 or higher

ETHERNET CONTROL INTERFACE

Connectors	1 RJ-45 male connector
Data rate	10/100Base-T, half/full duplex with
	autodetect
Protocols	ARP, DHCP, ICMP (ping), TCP/IP,
	Telnet, HTTP, SMTP
Default settings	Link speed and duplex
	level = autodetected
	IP address = 192.168.254.254,
	subnet mask = 255.255.0.0,
	default gateway = 0.0.0.0
	DHCP = off

FLEX I/O CONTROL INTERFACE

Number/type	4 analog or digital (configurable)
Connectors	(1) 3.5 mm captive screw
	connector, 5-pole captive screw
	connector
Digital inputs
Input voltage range	0-24VDC, clamped at +30VDC
Input impedance	28 kohms
Programmable pullup	2 kohms to +5VDC
Threshold low to high	Programmable range: 100 mV to
	24VDC, default = 2VDC
Threshold high to low	Programmable range: 100 mV to
	24VDC, default = 1VDC
Digital outputs	250 mA sink from 24VDC max.

Analog inputs	12 bit A/D, 0 to 24VDC
Pin configurations	1, 2, 3, 4 = digital I/Os 1, 2, 3, 4;
	5 = GND
IR/SERIAL (IR/S) CONTROL INTERFACE — IPL T SFI244 ONLY
Output number	4
Connectors	(1) 3.5 mm 8-pole captive screw
	connector
IR output carrier frequency	30 kHz to 1 MHz
Pin configurations	pins 1, 3, 5, 7 = S1, S2, S3, S4
	pins 2, 4, 6, 8 = GND
GENERAL
Power	100VAC to 240VAC, 50/60 Hz,
	10 watts, external, autoswitchable;
	to 12VDC, 1 A power supply.
	Product requires 0.5 A.
Temperature/humidity	Storage -40° to +158°F
	(-40° to +70°C) / 10% to 90%,
	non-condensing Operating +32° to
	+122°F (0° to +50°C) / 10% to
	90%, non-condensing
Rack mount	Yes, with optional 1U rack shelf,
	part #60-190-01, or the
	VersaTools® rack shelf,
	part #60-190-20; also under-
	furniture mountable with optional
	brackets #70-212-01or projector
	mountable with optional brackets
	#70-217-01
Enclosure type	Metal
Enclosure dimensions	1.7" H x 4.3" W x 3.0" D (1U high,
	quarter rack width) 4.3 cm H x
	10.9 cm W x 7.6 cm D (Depth
	excludes connectors.)
Product weight	0.7 lbs (0.3 kg)
Shipping weight	2 lbs (1 kg)
Vibration	ISTA/NSTA 1A in carton
	(International Safe Transit
	Association)
Listings	UL, CUL
Compliances	CE, FCC Class A, VCCI, AS/NZS,
	ICES
MTBF	30,000 hours
Warranty	3 years parts and labor
Model	Part Numbers
IPL T SF24	60-544-02
IPL T SFI244	60-544-06
Optional Accessories
1U 19" VersaTools rack shelf kit ..	60-190-20
1U 19" rack shelf kit	60-190-01
Under desk mount	70-212-01
Projector mount kit	70-217-01

Specifications are subject to change without notice.