Extron electronic specifications Specifications IPL T PC1, IPL T PC1i

Page 1

Specifications — IPL T PC1, IPL T PC1i

AC control interface

Connectors

 

IPL T PC1

1 female USA/Edison power connector

IPL T PC1i

1 female IEC power connector

Voltage

 

IPL T PC1

120 VAC, 50-60 Hz

IPL T PC1i

220 VAC, 50-60 Hz

Maximum AC load

 

IPL T PC1

12 A, 1440 watts at 120 VAC

IPL T PC1i

10 A, 2200 watts at 220 VAC

Serial control interface

Serial control port

(1) RS-232 only, 3.5 mm captive screw connectors, 4 pole

Baud rate and protocol

115200 to 300 baud (9600 baud = default) ; 8 (default) or 7 data bits; 1 (default) or 2

 

stop bits; no parity (default), or even or odd parity

Serial control pin configurations

1 = TX, 2 = RX, 3 = GND, 4 = +5 VDC

Ethernet control interface

Connector

1 RJ-45 female connector

Data rate

10/100Base-T, half/full duplex with autodetect

Protocols

ARP, DHCP, ICMP (ping), TCP/IP, UDP/IP, Telnet, HTTP, SMTP

Default settings

Link speed and duplex level = autodetected

 

IP address = 192.168.254.254

 

Subnet mask = 255.255.0.0

 

Gateway = 0.0.0.0

 

DHCP = off

Web server

Up to 200 simultaneous sessions

 

7.25 MB nonvolatile user memory

Program control

Extron’s Simple Instruction Set (SIS)

Global Viewer requirements

Microsoft® Internet Explorer ver. 6 or higher

Contact closure interface (input only)

Quantity/type

1 contact closure input

Contact input control connector . (1) 3.5 mm captive screw connector, 4 pole (shared with IR output port)

Contact closure (input only)

 

Input voltage range

0 to 5 VDC, clamped at +5.1 V

Input impedance

10k ohms

Threshold

1.6 VDC

Pin configuration

1 = contact input, 2 = GND

IR control interface

IR control port

(1) 3.5 mm captive screw connector, 4 pole (shared with contact closure input port)

Pin configurations

3 = S (IR signal output), 4 = GND

IR output carrier frequency

30 kHz to 1 MHz

General

Power input

100 VAC to 240 VAC, 50/60 Hz, 5 watts, internal, on 1 male IEC power connector

IPL T PC1

12 A (max.)

IPL T PC1i

10 A (max.)

Temperature/humidity

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing

 

Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Cooling

Convection, unvented

1-2IPL T PC1, IPL T PC1i Power Control • Specifications

Image 1
Contents Specifications IPL T PC1, IPL T PC1i IPL T PC1, IPL T PC1i Power Control Specifications
Related manuals
Manual 27 pages 50.4 Kb Manual 78 pages 34.87 Kb

IPL T PC1, IPL T PC1i specifications

The Extron Electronics IPL T PC1 i and IPL T PC1 are advanced presentation and control processors designed for optimal efficiency in various audiovisual applications. These devices serve as integral components in many professional environments, offering sophisticated capabilities for managing and automating AV systems.

Both models feature a robust, intuitive user interface that simplifies the management of complex audiovisual setups. The IPL T PC1 i and IPL T PC1 enable seamless integration with a variety of control systems, enhancing the user experience and providing streamlined operation. With their scalable design, these devices can cater to the needs of small conference rooms to large auditoriums, making them versatile solutions for diverse applications.

One standout feature of the IPL T PC1 i is its support for Extron's GUI Designer software. This powerful tool allows users to create customized graphical user interfaces tailored to specific AV systems, ensuring that control remains user-friendly and accessible. The IPL T PC1 i also supports a wide range of communication protocols, including Ethernet, RS-232, and USB, which facilitates compatibility with multiple devices and technologies.

Both models are equipped with advanced signal processing capabilities. They offer support for high-resolution video formats, ensuring that presentations and multimedia displays maintain their quality. Options for signal routing and switching further enhance the functionality of the devices, allowing for dynamic and adaptive presentations.

The IPL T PC1 i and IPL T PC1 also feature built-in scheduling and automation capabilities. Users can program specific tasks, such as turning systems on or off, adjusting volume levels, and changing input sources, at predetermined times. This feature maximizes efficiency, minimizes the need for manual intervention, and ensures that AV systems are ready when needed.

In terms of physical design, both models are compact and rack-mountable, allowing for easy installation in equipment racks or dedicated AV cabinets. They also include comprehensive diagnostic tools for troubleshooting and system monitoring, ensuring optimal performance and reliability.

Overall, the Extron Electronics IPL T PC1 i and IPL T PC1 stand out as reliable, feature-rich solutions for managing AV systems in a variety of settings, making them a popular choice among AV professionals and institutions alike. Their blend of adaptability, user interface design, and robust signal processing capabilities positions them as leaders in the AV control market.